TalentJR apps
Textbook: Geography – Class 11 (Balbharati, official free PDF) · pages 1–14
Mountains rise, valleys sink, the ground shakes and volcanoes erupt — all because of forces working inside the earth. This chapter explains slow (tectonic) movements that fold and fault the crust, and sudden movements such as earthquakes and volcanic eruptions. Learn the types of folds and faults, block mountains and rift valleys, seismic waves and the shadow zone, the Mercalli and Richter scales, volcanic materials and landforms, and the world belts of earthquakes and volcanoes, with answers to every exercise.
Landforms are shaped by internal (endogenic) and external forces. Internal or tectonic movements are either slow — vertical (epeirogenic, continent-building) and horizontal (orogenic, mountain-building) — or sudden, like earthquakes and volcanic eruptions.
Compressional forces push rocks together and, in soft or ductile rocks, make folds: anticlines and synclines, which may be symmetrical, asymmetrical, overturned, recumbent or isoclinal. Fold mountains such as the Himalayas and the Aravallis form this way.
Tensional forces pull rocks apart; rigid rocks crack and slip along a fault. Normal, reverse, tear and thrust faults result, and faulting builds block mountains (horsts, e.g. the Satpuras) and rift valleys (grabens, e.g. the Narmada and Tapi valleys).
An earthquake is shaking caused by sudden release of stress at the focus; the point above it is the epicentre. P-waves cross solids and liquids, S-waves only solids, so a shadow zone forms 105°–140° away from the epicentre. Intensity is rated on the Mercalli scale (I–XII), magnitude on the Richter scale.
A volcano throws out liquid (magma/lava), solid (dust, ash, breccia, bombs) and gaseous material. It builds lava domes, lava plateaus (Deccan Trap), calderas, crater lakes, volcanic plugs, cinder cones and composite cones. Most earthquakes and volcanoes lie in the Circum-Pacific, Mid-Atlantic and Mid-continental belts.
Get a ✓ Verified tutor for “Earth Movements” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Can faults form in fold mountains, and can folds form in block mountains?
Answer: Yes to both. Fold mountains like the Himalayas are cut by many faults (that is why they have frequent earthquakes), and the rocks of a block mountain may show older folds. Most mountain regions show both processes.
Use the book's data to find how far each station is from the epicentre (map scale 1 cm : 18 km).
Answer: The point where the three circles cross is the epicentre. This is a simplified method; real epicentres are fixed with computer models.
| Landform | How it forms | Example |
|---|---|---|
| Fold mountain | Compression bends soft, deep rock layers | Himalayas, Alps, Aravallis |
| Block mountain (horst) | Land between faults rises or surrounding land sinks | Satpuras, Vosges, Black Forest |
| Rift valley (graben) | Block between two faults sinks | Narmada, Tapi, East African Rift |
| Lava plateau | Runny lava from fissures spreads in layers | Deccan Trap |
| Caldera | Huge pit left after a violent eruption empties the chamber | Krakatoa area |
| Crater lake | Rain fills the crater of an extinct volcano | Crater Lake, Oregon (USA); note Lonar is a meteorite crater, not volcanic |
| Cinder cone | Ash and cinders pile into a steep cone | Monte Nuovo, Italy |
| Composite cone | Alternate lava and cinder layers | Mt St Helens, Fujiyama |
| Volcanic plug | Lava hardens inside the volcano's neck | Exposed when the cone erodes |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q1 Complete the chain (match A with B and C): Widespread volcanic eruption; Andaman and Nicobar Islands; Mercalli scale; Slow movements; Philippines; Volcanic material.
Answer: Widespread volcanic eruption – Fissure eruption – Deccan Trap. Andaman and Nicobar Islands – Zone V – Very high seismic vulnerability. Mercalli scale – Intensity – I to XII. Slow movements – Faulting – Block mountain. Philippines – Circum-Pacific belt – Mayon. Volcanic material – Volcanic bombs – Solid.
2. Q2 Identify the correct correlation (A: Assertion; R: Reason). (1) A: Faulting leads to development of fold mountains. R: Faulting occurs when tensional forces move away from each other. (2) A: Intensity of an earthquake measures the energy released. R: The Mercalli scale measures intensity. (3) A: South-East Asia, Japan and Pacific islands are most vulnerable to earthquakes and eruptions. R: They lie in the Ring of Fire.
Answer: (1) Only R is correct — faulting gives block mountains and rift valleys; fold mountains come from folding. (2) Only R is correct — intensity describes effects; energy released is magnitude (Richter). (3) Both A and R are correct and R is the correct explanation of A.
3. Q3 Identify the correct group: (A) symmetrical fold, isoclinal fold, overturned fold, recumbent fault; (B) Black Forest, Vosges, Himalayas, Satpuras; (C) Narmada Valley, African Valley, Tapi Valley, Rhine Valley; (D) caldera, crater lake, cinder cone, lava plateau.
Answer: Group A is wrong ('recumbent fault' should be recumbent fold). Group B is wrong (the Himalayas are fold mountains, the rest are block mountains). Group C is correct — all are rift valleys (the Rhine flows through a rift valley too). Group D is also a consistent group — all are volcanic landforms. If only one answer is allowed, C is the group built on the chapter's rift-valley examples.
4. Q4 Give geographical reasons: (1) Extinct conical volcanoes often form crater lakes. (2) People in the Himalayas are more vulnerable to earthquakes. (3) L-waves do not have a shadow zone. (4) Soft rocks form folds while hard rocks form faults. (5) Folds depend on the strength of rocks and intensity of forces.
Answer: (1) A conical volcano has a funnel-shaped crater at the top. Once the volcano is extinct no lava or gas comes out, so rainwater collects in the hollow and stays, forming a crater lake. (2) The Himalayas are young fold mountains still rising because the Indian plate keeps pushing into the Eurasian plate. Stress builds along many faults and is released as earthquakes, so the region is in seismic Zones IV and V. Steep slopes add landslides to the danger. (3) L-waves travel only along the earth's surface and do not pass through the interior or the core, so nothing blocks or bends them; they reach every place on the surface and leave no shadow. (4) Soft, ductile rocks can bend under compression without breaking, so they fold. Hard, brittle rocks cannot bend much; when the force is greater than their strength they crack and the blocks move, forming faults. (5) Weak, flexible rocks fold easily into large folds, while strong rocks resist. A slow, steady force produces gentle folds; a strong, long-lasting force produces overturned or recumbent folds, and too much force may break the rock instead.
5. Q5 (1) Explain different types of faults.
Answer: A fault is a fracture along which rock blocks move. (a) Normal fault: caused by tension; one block slips down the fault plane, and the exposed fault surface looks upward. (b) Reverse fault: caused by compression; one block is pushed up over the other and the fault surface leans over the lower block. (c) Tear (strike-slip) fault: blocks slide past each other horizontally with no vertical shift. (d) Thrust fault: a reverse fault with a low angle (under about 45°), so one block rides far over the other. Faulting forms block mountains (Satpuras, Vosges) and rift valleys (Narmada, Tapi, East Africa).
6. Q5 (2) Explain with examples different landforms produced by volcanic eruption.
Answer: Lava dome: lava hardens round the vent — steep with acidic lava, low and broad with basic lava. Lava plateau: huge flows from fissures spread in layers, e.g. the Deccan Trap. Caldera: a large pit (up to about 10 km wide) left when a violent eruption empties the chamber and the top collapses; smaller ones are craters. Crater lake: rain fills the crater of an extinct volcano. Volcanic plug: lava solidifies in the neck. Cinder cone: steep cone of ash, cinders and breccia, e.g. Monte Nuovo (Italy). Composite cone: alternate layers of lava and cinders, symmetrical, e.g. Mt St Helens (USA).
7. Q5 (3) Explain the concept of shadow zone. (4) Write a note on volcanic materials.
Answer: (3) Seismographs within 105° of the epicentre record both P and S-waves. S-waves cannot cross the liquid outer core, so they are absent everywhere beyond 105°. P-waves cross the core but are bent (refracted), so they miss the band from 105° to 140° and reappear beyond 140°. The band 105°–140° is therefore the shadow zone for both waves; each earthquake has its own shadow zone, and it can be drawn once the epicentre is known. (4) Liquid: molten rock — magma underground, lava on the surface; acidic lava (more silica, sticky, slow) and basic lava (less silica, runny, spreads far). Solid: volcanic dust, ash, angular breccia and volcanic bombs. Gas: a dark cauliflower-shaped cloud of steam and gases, some of which burn as flames. Krakatoa in 1883 showed all three.
8. Q6 Differentiate between: (1) folding and faulting (2) normal and reverse fault (3) syncline and anticline (4) asymmetrical and symmetrical fold (5) Mercalli and Richter scale (6) slow and sudden movements.
Answer: (1) Folding: compression, bending of flexible rocks, makes fold mountains (Himalayas). Faulting: mainly tension, breaking of rigid rocks, makes block mountains and rift valleys (Satpuras, Narmada). (2) Normal: tension, block slides down, fault surface looks upward. Reverse: compression, block pushed up, fault surface leans over the lower block. (3) Syncline: trough, limbs slope towards a low centre. Anticline: arch, limbs slope away from a raised centre. (4) Asymmetrical: axial plane inclined, limbs at different angles. Symmetrical: axial plane vertical, limbs at equal angles. (5) Mercalli: intensity from observed effects, I–XII. Richter: magnitude or energy from seismograph readings, logarithmic. (6) Slow: act over millions of years, build continents and mountains, epeirogenic or orogenic. Sudden: act in seconds or hours, cause earthquakes and eruptions, effects seen at once.
9. Q7 Draw diagrams for (1) types of folds (2) types of faults (3) shadow zone (4) volcanic landforms — describe what each diagram shows.
Answer: (1) Five sketches of bent layers: symmetrical (vertical axial plane, equal limbs), asymmetrical (tilted plane), overturned (one limb tipped past vertical), recumbent (lying almost flat), isoclinal (parallel limbs). (2) Four block sketches with a fault plane: normal (right block dropped), reverse (block pushed up), tear (arrows sideways), thrust (one block slid over at a low angle). (3) A circle with the core inside; mark the epicentre at the top, lines at 105° and 140° on both sides, shade 105°–140° as the P-wave shadow, label S-waves absent beyond 105°. (4) Cross-sections of a lava dome, lava plateau, caldera, crater lake, plug, cinder cone and composite cone with layers labelled.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Movements that raise large parts of the crust to form continents are…
Answer: B. Vertical, continent-building movements.
2. Folding mostly happens in rocks that are…
Answer: C. Deep rocks under pressure bend rather than break.
3. The downfolded part of a fold is the…
Answer: C. Limbs slope towards a low centre.
4. Which is a young fold mountain?
Answer: C. 10–25 million years old.
5. The Satpuras are an example of a…
Answer: B. The book lists them with the Vosges and Black Forest.
6. A fault with sideways movement only is a…
Answer: D. No vertical displacement.
7. A rift valley is also called a…
Answer: A. A sunken block between faults.
8. Shaking is strongest at the…
Answer: A. Intensity falls with distance from it.
9. Which waves pass through solids, liquids and gases?
Answer: B. S-waves need solids.
10. The shadow zone for both P and S-waves lies between…
Answer: D. Beyond 140° P-waves reappear.
11. The Mercalli scale runs from…
Answer: C. Based on observed effects.
12. Lava with a high silica content is…
Answer: C. It builds steep, high domes.
13. Angular solid fragments thrown out by a volcano are…
Answer: B. Fine pieces are dust and ash.
14. The Deccan Trap is a…
Answer: B. Built by fissure eruptions of basic lava.
15. Mayon volcano lies in the…
Answer: D. It is in the Philippines.
Get a ✓ Verified tutor for “Earth Movements” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Earth Movements the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 50 minutes
Get a ✓ Verified tutor for “Earth Movements” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Earth Movements.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Earth Movements” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.