TalentJR apps
Textbook: Geography – Class 11 (Balbharati, official free PDF) · pages 15–26
Before a river or glacier can carry rock away, the rock must first be broken down where it stands. This chapter explains weathering — physical, chemical, biological and human-made — the factors that control it, why some rocks weather faster than others, and mass wasting: the downhill slide, fall, flow or creep of material under gravity, as in the Malin landslide near Pune. Answers to every exercise are included.
Weathering is the breaking down of rocks in place (in situ) by water, heat, pressure and living things. It is physical (disintegration) or chemical (decomposition); usually both act together and one dominates.
Water causes freeze-thaw weathering and chemical changes such as hydrolysis, solution, oxidation, carbonation and salt weathering. Heat causes granular disintegration, shattering and block disintegration; release of pressure causes exfoliation, common in granite.
Plants, animals, micro-organisms and humans also weather rocks. Mining, quarrying, blasting and acid rain from air pollution speed up the process; monuments such as the Taj Mahal and the Parthenon are being damaged.
The rate of weathering depends on climate, rock type and rock structure. Chemical weathering is rapid in hot, humid climates; joints, vertical beds and coarse grains make rocks weather faster. Weathering forms soils and ores like laterite and bauxite.
Mass wasting is the downslope movement of soil and rock by gravity alone, without a transporting agent. Slope, gravity, water, weak material, load, climate and loss of vegetation control it. Its types — fall, slide, flow, creep and solifluction — differ by speed and water content.
Get a ✓ Verified tutor for “Weathering and Mass Wasting” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A region has a mean annual temperature of 5 °C and 1000 mm of rain. Which weathering dominates, and where could it be?
Answer: Physical weathering, mainly freeze-thaw, will dominate, with slow chemical weathering. Such a climate occurs in high mountains like the Himalayas or in cool high-latitude regions such as parts of Canada, Scandinavia or Russia.
Why are landslides frequent in the Himalayan foothills and Western Ghats but rare in Marathwada?
Answer: Steep slopes, heavy rain, weak or jointed rock, earthquakes and cutting of slopes make the Himalayan foothills and Western Ghats landslide-prone, while the flat, drier plateau of Marathwada and Karnataka's Maidan has little slope for gravity to act on.
| Process | How it works | Where / example |
|---|---|---|
| Freeze-thaw | Water freezes in cracks, expands and splits rock | High mountains, high latitudes |
| Granular disintegration | Minerals expand unequally; grains fall off | Hot deserts |
| Block disintegration | Rock splits along joints with heating and cooling | Jointed granite in deserts |
| Exfoliation | Outer layers peel off after pressure release | Granite domes of the Deccan |
| Oxidation | Iron and aluminium combine with oxygen | Red and yellow weathered rock; rust |
| Carbonation and solution | Weak carbonic acid dissolves carbonates | Limestone in humid regions |
| Salt weathering | Salt crystals push grains apart | Honeycomb rocks, Hareshwar |
| Landslide | A mass slides as one unit along a slip surface | Western Ghats, Himalayas, Malin 2014 |
| Solifluction | Saturated soil creeps over permafrost | Tundra and alpine areas |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q1 Complete the chain: rock type (igneous, sedimentary, metamorphic) – rock (dolomite, slate, basalt, limestone, granite) – dominant weathering (physical, chemical).
Answer: Sedimentary – Dolomite – Chemical (carbonation). Sedimentary – Limestone – Chemical (solution, carbonation). Metamorphic – Slate – Physical (splits along its cleavage). Igneous – Granite – Physical (block disintegration, exfoliation). Igneous – Basalt – Chemical in humid areas such as the Konkan (hydrolysis, oxidation forming laterite); in dry areas it weathers physically. The dominant type really depends on the climate.
2. Q2 Identify the correct correlation: (1) A: In areas of high rainfall, slides are very common. R: Types of mass wasting depend on a region's climate. (2) A: Gravity is a major factor in mass wasting. R: Gravity pulls all things down to the earth's surface. (3) A: Freeze and thaw weathering is common in desert areas. R: Water gets into cracks and breaks the rocks. (4) A: Surface water helps solifluction. R: Water table is responsible for the same.
Answer: (1) Both A and R are correct and R is the correct explanation of A. (2) Both A and R are correct and R is the correct explanation of A. (3) Only R is correct — deserts lack water, so freeze-thaw is not common there. (4) Only A is correct — solifluction happens because surface or melt water cannot sink through the permafrost; the water table is not the cause.
3. Q3 Identify the correct group: (A) oxidation, carbonation, freeze-thaw, shattering; (B) solution, salt weathering, oxidation, carbonation; (C) fall, creep, slide, flow; (D) pressure, temperature, slope, rainfall.
Answer: Group C is correct — all are types of mass wasting. A mixes chemical (oxidation, carbonation) with physical (freeze-thaw, shattering). B lists processes the book describes under water and chemical weathering, but salt weathering is mainly physical, so it is not a clean group. D mixes weathering factors (pressure, temperature) with mass-wasting factors (slope).
4. Q4 Give geographical reasons: (1) Temperature is the main factor behind granular weathering. (2) Human is an agent of weathering. (3) Slope is a major factor in mass wasting. (4) Oxidation changes the size and colour of rocks. (5) Effect of mass movement will be greater along the western slope of the Sahyadris than the eastern slope.
Answer: (1) A rock is made of different minerals that expand and contract by different amounts when heated and cooled. In hot deserts, with very hot days and cold nights, this unequal expansion builds stress between grains until individual grains break free. (2) Mining, quarrying, blasting hills for roads and dams, and cutting forests on slopes break rocks very quickly; pollution causes acid rain that eats into limestone and marble. Humans thus do in years what nature takes thousands of years to do. (3) Gravity pulls material downhill only where there is a slope; the steeper the slope, the stronger the downhill pull compared with friction, so movements are more frequent and faster. Plains have almost none. (4) Iron and aluminium in the rock combine with oxygen to form oxides that are larger in volume and softer than the original minerals, so the rock swells and crumbles. Iron oxides are red and aluminium oxides yellow, so the colour changes. (5) The western slope of the Sahyadris is steep and receives very heavy rain from the south-west monsoon; the soil becomes saturated and heavy and the laterite and basalt are deeply weathered. The eastern slope is gentle and lies in the rain-shadow, so mass movements are fewer.
5. Q5 Write short notes on: (1) Gravity and solifluction (2) Role of water in mass wasting (3) Exfoliation (4) Weathering and homogeneity in rocks (5) Carbonation.
Answer: (1) Gravity is the force that pulls everything downslope and drives all mass wasting. Solifluction is a slow, gravity-driven flow of waterlogged soil in cold regions: the frozen ground below (permafrost) is impermeable, so melt water saturates the top layer, which creeps a few millimetres to centimetres a year. (2) Water from rain, snowmelt, irrigation or leaks adds weight to slope material, fills pores, and reduces friction between grains and along slip surfaces. A little water binds grains, but excess water causes slides and flows, as at Malin in 2014. Clay layers that hold water near the surface make slopes slip. (3) Exfoliation is the peeling off of curved outer shells of rock. When overlying rock is removed, the buried rock expands as pressure falls; heating and cooling add to it. It is common in uniform rocks like granite and forms rounded domes, as in parts of Karnataka and Telangana. (4) A homogeneous rock (one mineral type, no joints) weathers evenly and slowly, while rocks with joints, layers or mixed minerals break more easily because water and stress act along weak planes and minerals expand unequally. Granite is fairly uniform and peels by exfoliation; layered sedimentary rocks crumble faster. (5) Carbonation is chemical weathering in which carbon dioxide from the air and from decaying matter dissolves in water to form weak carbonic acid. It reacts with calcium carbonate in limestone and dolomite and with feldspar, breaking them down; with solution it hollows limestone in humid areas, while in arid areas limestone stands as cliffs.
6. Q6 Draw neat labelled diagrams of (1) freeze-thaw weathering (2) block disintegration (3) biological weathering — describe them.
Answer: (1) Three stages: a crack with water in it; water frozen to ice with arrows pushing outward and the crack wider; rock split into pieces. Label 'water', 'ice expands', 'rock breaks'. (2) A granite outcrop with a grid of joints; label 'day heating – expansion' and 'night cooling – contraction'; show joints widening and blocks separating. (3) A tree on a rock with roots going into cracks, labelled 'roots widen cracks'; lichens on the surface labelled 'chemicals break surface'; a burrow labelled 'burrowing animal'.
7. Q7 (1) Explain with examples the process of weathering happening in the Konkan.
Answer: The Konkan is warm and humid with very heavy monsoon rain, so chemical weathering dominates. Basalt is deeply decomposed by hydrolysis; heavy rain leaches away silica and other substances, leaving iron and aluminium oxides, which forms red laterite (oxidation gives the red colour). Along the coast salt spray and alternate wet and dry seasons cause salt weathering, producing honeycomb rocks at Hareshwar. Roots of the dense vegetation and lichens add biological weathering. On the steep ghat slopes the deeply weathered material often slips as landslides in the rains.
8. Q7 (2) Explain the correlation between the Himalayas and mass movements, with examples.
Answer: The Himalayas are young fold mountains with very steep slopes, still rising as the Indian plate pushes north; frequent earthquakes loosen rocks along faults. Heavy monsoon rain on the southern slopes and snowmelt soak the soil, while freeze-thaw shatters rocks at height. Roads, dams, tunnels, quarrying and deforestation cut and load the slopes. So falls, landslides, debris flows and creep are common; the hill roads of Uttarakhand and Himachal Pradesh are often blocked in the monsoon, and areas like Uttarkashi are known for landslides and earthquakes.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Weathering differs from erosion because weathering…
Answer: C. Erosion moves material; weathering breaks it in situ.
2. Frost weathering is least effective in…
Answer: D. Temperatures never fall to freezing there.
3. Reaction of silicate minerals with water is…
Answer: A. Common in igneous rocks.
4. Rust is an example of…
Answer: D. Iron combines with oxygen.
5. Honeycomb structures at Hareshwar come from…
Answer: A. Salts crystallise and push grains out.
6. Large daily temperature range mainly causes…
Answer: D. Minerals expand unequally.
7. Exfoliation is caused by…
Answer: A. Outer layers expand after unloading.
8. Lichens on rocks mainly cause…
Answer: B. They release chemicals.
9. Which rock is harder than steel, per the book?
Answer: A. It fractures physically but resists chemical attack.
10. Chemical weathering is fastest in…
Answer: C. Heat and water speed reactions.
11. Mass wasting will NOT occur on…
Answer: A. It needs a slope.
12. Too much water in soil…
Answer: B. Friction falls, so slopes fail.
13. The slowest type of mass movement is…
Answer: B. It takes years or centuries.
14. Solifluction happens over…
Answer: B. Frozen ground stops water draining.
15. The Malin disaster was a…
Answer: A. After heavy rain in July 2014.
Get a ✓ Verified tutor for “Weathering and Mass Wasting” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Weathering and Mass Wasting the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 45 minutes
Get a ✓ Verified tutor for “Weathering and Mass Wasting” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Weathering and Mass Wasting.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Weathering and Mass Wasting” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.