TalentJR apps
Textbook: Geology – Class 11 (Balbharati, official free PDF) · pages 89–99
Maharashtra sits on one of the largest piles of lava on Earth, yet its eastern districts hide rocks more than 3,000 million years old along with coal, manganese and iron ore. This chapter walks through the state's three landform regions, its rock record from the Archaean to the present, the layered Deccan Traps, and where each economic mineral is found and what it is used for — with every exercise answered.
Maharashtra (3,07,713 sq km, third largest state by area) has three physiographic regions: the Maharashtra (Deccan) Plateau, about 81% of the state at 400–600 m with flat-topped east–west and NW–SE ranges; the Western Ghats or Sahyadri, a north–south scarp averaging 1000–1300 m with Kalsubai (1646 m) as the highest peak; and the narrow Konkan coast, about 720 km long and 50–105 km wide, cut by short, swift west-flowing rivers.
The rock record runs from Palaeo-Archaean gneisses (3600–3200 Ma) in eastern Vidarbha through Neo-Archaean schists, quartzites and Dongargarh granite, Proterozoic Sausar and Sakoli groups (manganese, copper), Neo-Proterozoic Kaladgi, Pakhal, Vindhyan and Penganga sediments (limestone), Gondwana rocks from the Talchir tillite to the coal-bearing Barakar and Kamthi formations and the Jurassic Kota–Chikiala beds, and Cretaceous Lameta and Bagh beds.
The Deccan Traps erupted about 66 million years ago (range roughly 69–61 Ma) through fissures as near-horizontal flood basalt flows that cover over 5 lakh sq km and most of Maharashtra. Flows are pahoehoe (ropy) or aa (blocky), separated by red bole and intertrappean lake beds, cut by dolerite dykes, and divided into the Kalsubai, Lonavala, Diveghat and Mahabaleshwar subgroups of the Sahyadri Group.
Since the eruptions, weathering under a hot, wet climate has produced laterite and bauxite caps in western Maharashtra and the Konkan, while Quaternary alluvium fills the river valleys; Toba volcanic ash about 74,000 years old is preserved in some valley sediments.
Economic minerals: manganese (Nagpur–Bhandara belt), iron ore (Chandrapur, Gadchiroli, Gondia, Sindhudurg), coal (Nagpur, Chandrapur, Yavatmal), bauxite (Kolhapur and the Konkan), cement-grade limestone (Chandrapur, Yavatmal), kyanite–sillimanite (Bhandara), fluorite (Dongargaon, Chandrapur), barite (Mul), chromite, copper, tungsten, silica sand, zeolites in basalt cavities, and offshore oil and gas at Bombay High.
Get a ✓ Verified tutor for “Geology of Maharashtra” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Arrange oldest to youngest: Lameta beds, Kaladgi Group, Barakar Formation, Amgaon gneiss, Deccan basalt.
Answer: Amgaon gneiss → Kaladgi → Barakar → Lameta → Deccan basalt.
A cement company wants to set up a plant in Maharashtra. Which district would you suggest, and why?
Answer: Chandrapur (or Yavatmal) — limestone and coal are both available locally, which is why several cement plants already operate there.
| Mineral / resource | Where it is found | Main uses |
|---|---|---|
| Manganese ore | Nagpur, Bhandara (Sausar Group) | Steel, ferro-alloys, dry cells, paints |
| Iron ore | Chandrapur, Gadchiroli, Gondia, Sindhudurg | Iron and steel |
| Coal | Nagpur, Chandrapur, Yavatmal (Barakar, Kamthi) | Thermal power, cement, paper, textiles |
| Bauxite | Kolhapur, Satara, Sangli, Raigad, Ratnagiri, Sindhudurg, Thane | Aluminium, refractories, abrasives |
| Limestone and dolomite | Chandrapur, Yavatmal (Vindhyan, Penganga); dolomite in Nagpur | Cement, flux, paper, sugar |
| Kyanite and sillimanite | Bhandara, Gadchiroli | Refractories, spark-plug porcelain |
| Fluorite and barite | Dongargaon and Mul, Chandrapur | Metallurgy, ceramics; drilling mud, fillers |
| Chromite | Bhandara, Chandrapur, Nagpur, Sindhudurg | Stainless steel, refractories |
| Copper / tungsten | Sakoli Group shear zones; Nagpur district | Wires and alloys; hard tools and alloys |
| Silica sand | Sindhudurg, Ratnagiri, Kolhapur (Kaladgi) | Glass, foundry, chemicals |
| Zeolites and silica gems | Cavities in Deccan basalt (Pune, Nashik and elsewhere) | Water softening, specimens, ornaments |
| Oil and natural gas | Bombay High, offshore Mumbai | Fuel, petrochemicals |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Fill in the blanks: (1) Bagh beds occur in … district (Dhule / Ratnagiri / Satara / Hingoli). (2) Lameta beds occur in parts of … district (Yavatmal / Kolhapur / Solapur / Raigad).
Answer: (1) (a) Dhule. (2) (a) Yavatmal.
2. Q.2 True or false: (1) Between the Cambrian and the Upper Carboniferous there is no rock record in Maharashtra. (2) The narrow plain between the Western Ghats and the Arabian Sea is the Konkan coast. (3) The Sahyadris are also called the Western Ghats.
Answer: (1) True — no rocks of that age are found (the land was being eroded; the Gondwana glaciation came only at the end of this interval). (2) True. (3) True.
3. Q.3 Choose the correct alternative: pahoehoe lava flows predominate in (a) Dhule–Aurangabad–Pune–Nashik (b) Osmanabad–Sangli–Satara–Latur (c) Nagpur–Buldhana–Amravati–Akola (d) Parbhani–Beed–Nanded–Akola.
Answer: (a) Dhule – Aurangabad – Pune – Nashik.
4. Q.4 Match the river with its origin: Narmada, Godavari, Krishna, Tapi with Betul, Amarkantak, Trimbakeshwar, Mahabaleshwar.
Answer: Option 1: Narmada – Amarkantak, Godavari – Trimbakeshwar, Krishna – Mahabaleshwar, Tapi – Betul (Multai).
5. Q.5 Arrange oldest to youngest: Lameta beds, Talchir Formation, Kaladgi Group.
Answer: (c) Kaladgi Group → Talchir Formation → Lameta beds.
6. Q.6 Give geological reasons: (a) Iron mining is economically suitable in Maharashtra. (b) Bauxite mining is feasible in Maharashtra. (c) Secondary minerals like zeolites occur in the Deccan Traps. (d) Thermal power plants in Maharashtra get their coal from Vidarbha.
Answer: (a) Archaean and Proterozoic banded iron formations of Chandrapur, Gadchiroli and Gondia and the Redi deposits of Sindhudurg contain high-grade hematite and magnetite close to the surface, so they can be mined by open pits; rail and road links and a big steel demand in the state make it profitable. (b) Long tropical weathering of basalt under heavy rain has leached away silica and bases and left aluminium-rich bauxite below laterite caps on flat plateau tops of Kolhapur, Satara, Raigad, Ratnagiri and Sindhudurg; these blanket deposits are shallow and easy to quarry, and coastal ports help transport. (c) Deccan lava was full of gas bubbles; when it cooled the bubbles became vesicles. Hot groundwater later circulated through the basalt, dissolved Si, Al, Ca and Na from its glass and feldspar, and crystallised zeolites, apophyllite, quartz, agate and calcite inside the cavities. (d) All of the state's workable coal lies in the Permian Gondwana Barakar and Kamthi formations, which are preserved only in the rift basins of Nagpur, Chandrapur (Wardha valley) and Yavatmal; the rest of the state is covered by basalt or older rocks without coal.
7. Q.7 Short notes: (1) building stones of Maharashtra; (2) energy resources of Maharashtra; (3) secondary minerals in the Deccan Traps; (4) uses of kyanite and sillimanite.
Answer: (1) Compact Deccan basalt is the main building stone — strong and durable, used for forts, temples, ghats, dams and the rock-cut Ajanta, Ellora and Elephanta caves; crushed basalt is the chief aggregate for concrete and roads. Laterite, cut into blocks when moist and hardening in air, builds houses and forts in Ratnagiri, Sindhudurg and Kolhapur (e.g. Sindhudurg fort). Sandstones and limestones of the Vindhyan, Penganga and Gondwana rocks are used in Vidarbha, and granite and gneiss of Gondia–Bhandara are quarried for paving and decorative stone. (2) Coal from the Barakar and Kamthi formations of Nagpur, Chandrapur and Yavatmal runs thermal power stations such as Chandrapur and Koradi; lignite in Ratnagiri–Sindhudurg; oil and gas from Bombay High offshore; coal bed methane potential in the Wardha valley; plus hydroelectric power from Koyna and other Sahyadri dams that use the steep Ghat slopes. (3) Vesicles and fractures in basalt are filled by zeolites — heulandite, stilbite, natrolite, mesolite, scolecite, chabazite — with apophyllite, prehnite, the rare blue cavansite of Wagholi (Pune), and silica minerals: rock crystal, amethyst, chalcedony, agate, jasper and opal, plus calcite. They formed from hot groundwater after the lava cooled and are prized as museum specimens and ornaments. (4) Both are Al₂SiO₅ minerals of high-grade metamorphic schists and gneisses in Bhandara and Gadchiroli. They withstand very high temperatures and are rich in alumina, so they are used to make refractory bricks and linings for furnaces and kilns, high-alumina ceramics, and spark-plug porcelain insulators.
8. Q.7 (5) Short notes on the occurrence of: (a) manganese (b) iron ore (c) coal (d) bauxite (e) chromite (f) copper.
Answer: (a) Manganese: in metamorphosed sediments of the Sausar Group in Nagpur and Bhandara, part of the Nagpur–Bhandara–Balaghat belt — one of the world's well-known manganese belts. (b) Iron ore: hematite and magnetite in Precambrian iron formations of Chandrapur, Gadchiroli and Gondia, and in Sindhudurg on the coast. (c) Coal: Permian Barakar and Kamthi formations of the Gondwana basins in Nagpur, Chandrapur and Yavatmal, worked from underground and opencast mines. (d) Bauxite: blanket and pocket deposits under laterite caps on basalt in Kolhapur, Satara, Sangli, Raigad, Ratnagiri, Sindhudurg and Thane. (e) Chromite: pockets, veins and lenses in ultramafic rocks of Bhandara, Chandrapur, Nagpur and Sindhudurg. (f) Copper: sulphide mineralisation along shear zones in the Sakoli Group of Nagpur, Bhandara, Chandrapur and Gadchiroli; the Chandrapur, Gadchiroli and Nagpur deposits are economic.
9. Q.8 (1) Describe the lithostratigraphy of the Deccan Traps. (3) Explain why the thickness of basalt varies in the Deccan Volcanic Province.
Answer: (1) The lavas form the Deccan Supergroup; in the Western Ghats they make up the Sahyadri Group, which is split by marker horizons M1–M4 into four subgroups (oldest at the base): Kalsubai Subgroup — Salher, Lower Ratangad and Upper Ratangad formations; Lonavala Subgroup — Indrayani and Karla formations; Diveghat Subgroup — Elephanta, Diveghat and Purandargad formations; Mahabaleshwar Subgroup — Mahabaleshwar Formation at the top. The lower formations have many compound pahoehoe flows; the upper ones have thicker simple flows. Red boles and intertrappean beds separate flows, and dolerite dykes cut them. (3) Each flow's thickness depends on how much lava came out in one eruption and how fluid it was — individual flows range from under a metre to over 35 m. The lava filled an uneven older surface, so it piled thicker in valleys and basins and thinner over highs. The pile is thickest (well over 1–2 km) near the western source region and thins eastward toward Nagpur, where the edge of the province lies. Later uplift and erosion removed different amounts from different places — deep valleys and the Konkan scarp have cut through much of it — and pauses produced red boles and intertrappean beds that add to local variation.
10. Q.8 (2) Give the genesis of laterite and bauxite. (4) Give an account of the major economic minerals of Maharashtra.
Answer: (2) Both are residual deposits made in place by intense chemical weathering in a hot, humid tropical climate with alternate wet and dry seasons. Rainwater, slightly acidic with CO₂, attacks the feldspar and pyroxene of basalt; soluble Na, K, Ca, Mg and much of the silica are carried away by groundwater, while insoluble iron and aluminium hydroxides stay behind and accumulate. Flat plateau tops with good drainage and slow erosion let the profile become thick. If iron oxides dominate, the hard, red, porous residue is laterite (it hardens further when exposed); where leaching is extreme and aluminium hydroxides (gibbsite, boehmite) dominate, bauxite forms, often as a layer beneath the laterite cap. In Maharashtra this happened mainly in the Paleogene and Neogene on the Sahyadri and Konkan plateaus. (4) Manganese (Sausar Group, Nagpur–Bhandara; steel, dry cells); iron ore (Chandrapur, Gadchiroli, Gondia, Sindhudurg; steel); coal (Barakar and Kamthi, Nagpur–Chandrapur–Yavatmal; power, cement); bauxite (Kolhapur, Konkan districts; aluminium, refractories); limestone and dolomite (Vindhyan and Penganga of Chandrapur–Yavatmal, Sausar dolomite of Nagpur; cement, flux); kyanite and sillimanite (Bhandara, Gadchiroli; refractories); fluorite and barite (Dongargaon and Mul, Chandrapur; metallurgy, drilling mud); chromite, copper and tungsten in Vidarbha; silica sand (Kaladgi, south Konkan; glass); zeolites in basalt; and oil and gas at Bombay High.
11. Q.8 (5) Describe the general stratigraphic succession of Maharashtra.
Answer: (i) Palaeo-Archaean (3600–3200 Ma): Amgaon, Tirodi and Peninsular gneisses — basement in eastern Vidarbha. (ii) Neo-Archaean (2800–2500 Ma): Amgaon, Sakoli, Nandgaon and Dongargarh groups — schists, quartzites, marbles, amphibolites with Fe and Mn bands, intruded by Dongargarh granite (Nagpur, Bhandara, Gondia, Chandrapur, Gadchiroli). Eparchaean unconformity. (iii) Palaeo- to Meso-Proterozoic (2500–1000 Ma): Sausar and Khairagarh groups (Nagpur, Bhandara, Gondia), with manganese. (iv) Neo-Proterozoic (1000–541 Ma): Kaladgi (Ratnagiri–Sindhudurg), Pakhal, Vindhyan and Penganga (Chandrapur, Yavatmal, Gadchiroli) — sandstone, shale, limestone. Gap from Cambrian to Early Carboniferous. (v) Upper Carboniferous: Talchir tillite. (vi) Permian: Barakar (coal) and Kamthi. (vii) Triassic: Mangli, Pachmarhi, Maleri. (viii) Jurassic: Kota and Chikiala — together (v)–(viii) form the Gondwana Supergroup. (ix) Upper Cretaceous: Lameta and Bagh beds (infratrappeans). (x) Latest Cretaceous–Palaeocene (~66 Ma): Deccan Trap basalts with intertrappeans, covering most of the state. (xi–xii) Palaeocene–Pliocene: laterite, bauxite, lignite-bearing sediments in the west. (xiii) Pleistocene–Recent: alluvium, river terraces, raised beaches, soils, Toba ash.
12. Q.9 Passage on the Singhbhum Shear Zone (217 Mt ore at 1.36% Cu; Sargipali belt 206 Mt at 6.73% Pb and 0.33% Cu). (1) What kind of deposit is typical of the zone? (2) How is the copper mineralisation associated with the shear zone? (3) Calculate the total Cu and Pb content. (4) If the Sargipali deposits are 1660 Ma old, name the period.
Answer: (1) Sulphide ore deposits — chalcopyrite (copper), pyrite and pyrrhotite. (2) Hydrothermal fluids, guided by the faults of an old rift zone, deposited the copper sulphides along the shear zone; the ores formed together with the volcano-sedimentary rocks (syngenetic) and before the main deformation and metamorphism. (3) Singhbhum copper = 217 × 1.36/100 = 2.95 million tonnes Cu. Sargipali lead = 206 × 6.73/100 ≈ 13.86 million tonnes Pb; Sargipali copper = 206 × 0.33/100 ≈ 0.68 million tonnes Cu. Total copper in both ≈ 3.63 million tonnes; lead ≈ 13.86 million tonnes (the passage gives no lead figure for Singhbhum itself). (4) 1660 Ma falls in the Palaeoproterozoic Era (Statherian Period, 1800–1600 Ma) of the Proterozoic Eon.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Bagh beds occur in … district.
Answer: D. A marine Cretaceous bed of the Narmada valley.
2. Lameta beds occur in parts of … district.
Answer: D. Also Nagpur, Chandrapur and Amravati.
3. Pahoehoe flows dominate in…
Answer: B. Elsewhere aa flows dominate.
4. The Krishna river rises at…
Answer: C. Trimbakeshwar is the Godavari's source.
5. Correct order, oldest to youngest:
Answer: A. Neo-Proterozoic → Carboniferous → Cretaceous.
6. The highest peak of the Sahyadri is…
Answer: A. 1646 m.
7. Coal in Maharashtra comes mainly from…
Answer: C. Permian Gondwana rocks of Vidarbha.
8. Deccan basalt is mainly made of…
Answer: A. Basalt is a basic rock.
9. Red bole between flows indicates…
Answer: C. The flow top weathered before the next flow covered it.
10. The richest manganese ores occur in the…
Answer: B. Nagpur–Bhandara belt.
11. Bauxite in Maharashtra is mainly found…
Answer: D. Kolhapur and Konkan districts.
12. Kyanite and sillimanite are used as…
Answer: D. High melting point and alumina content.
13. Bombay High lies about … from Mumbai.
Answer: A. WNW in the Arabian Sea.
14. The word 'trap' refers to…
Answer: D. Swedish trappa, stair.
15. The Satmala–Ajanta hills separate the…
Answer: B. They trend east–west.
Get a ✓ Verified tutor for “Geology of Maharashtra” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Geology of Maharashtra the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “Geology of Maharashtra” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Geology of Maharashtra.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Geology of Maharashtra” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.