TalentJR apps
Textbook: Geology – Class 11 (Balbharati, official free PDF) · pages 100–127
Geology is learnt with your hands and eyes: scratching, streaking and weighing minerals, naming rocks from their grains, reading contour maps, and walking a real outcrop. This chapter guides you through all eighteen practicals of the Class 11 syllabus — mineral and rock identification, specific gravity by Walker's steelyard, topomaps and contour profiles, district resource maps, Maharashtra's geoheritage sites and safe fieldwork — with the sample questions answered.
Practicals 1–8 identify minerals by their physical properties — colour, streak, lustre, form, fracture, cleavage, hardness and specific gravity — and then apply these to the silica, feldspar, amphibole, pyroxene, mica, olivine and zeolite groups and to apophyllite, talc, gypsum, calcite and fluorite. Observe in daylight, never mark the specimens, and write a full description in the journal on the same day.
Specific gravity (weight in air ÷ loss of weight in water) is measured with Walker's steelyard balance or Jolly's spring balance; take three readings and average them. Quartz gives about 2.65, calcite 2.71 and barite about 4.5.
Practicals 9–11 identify igneous, sedimentary and metamorphic rocks by their minerals, texture and structure — e.g. granite (quartz, feldspar, mica, coarse), sandstone (cemented sand grains), marble (granulose calcite) and gneiss (light and dark bands).
Practicals 12–15 read maps: Survey of India topomaps (1:50,000 sheets, 20 m contour interval, conventional signs), contour patterns for hills, ridges, saddles, valleys, spurs, plateaus and depressions, drawing a topographic profile along a line X–Y, and reading District Resource Maps and the mineral map of Maharashtra.
Practicals 16–18 take you outdoors: Maharashtra's geoheritage sites (Lonar crater, Nighoj potholes, Harihareshwar honeycomb weathering, Gulunchwadi natural bridge, columnar joints, Panchgani tableland, Sandhan slot canyon, hot springs), sketching landforms of rivers, sea, wind and glaciers, and planning safe fieldwork with a report.
Get a ✓ Verified tutor for “Practical Exercises” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A quartz piece weighs 26.5 g in air and 16.5 g in water. Find its specific gravity.
Answer: SG = 2.65 — exactly what is expected for quartz.
A rock is white and sugary, cannot scratch glass, and fizzes with dilute HCl. A second white rock scratches glass and does not fizz. Name both.
Answer: First rock: marble. Second rock: quartzite. Both are granulose metamorphic rocks.
Along X–Y, contours of 300, 400, 500, 400 and 300 m are crossed at 1, 2, 3, 5 and 8 cm from X. Vertical scale 1 cm = 100 m. Describe the profile.
Answer: An asymmetrical hill about 500 m high with its steep slope toward X and gentle slope toward Y.
| Site | Where | What it shows |
|---|---|---|
| Lonar crater | Buldhana | Meteorite impact crater in basalt with a saline lake |
| Nighoj potholes | Kukadi river, Ahmednagar | Potholes drilled into basalt by river-borne pebbles |
| Harihareshwar | Raigad coast | Honeycomb weathering of basalt by sea water |
| Natural bridge | Gulunchwadi, Pune | Rock arch cut by a meandering stream |
| Columnar joints | Panhala, Jyotiba (Kolhapur), Naldurg, Gilbert Hill (Mumbai) | Polygonal columns formed by cooling contraction |
| Panchgani tableland | Satara | Laterite-capped plateau and mesas on lava flows |
| Sandhan valley | Samrad, Ahmednagar | Slot canyon cut along fractures |
| Hot springs | Vajreshwari, Pali, Unhale, Tural, Unkeshwar, Unapdev | Groundwater heated at depth rising along fractures |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Topomaps Q.1: (1) What are topomaps? (2) Which organisation prepares them for India? (3) Which scales are commonly used by the Survey of India?
Answer: (1) Topomaps (topographic maps) are large-scale maps that show the shape of the land with contours together with natural features (rivers, forests, hills) and man-made features (roads, railways, settlements) using standard signs and colours. (2) The Survey of India, with headquarters at Dehradun. (3) 1:250,000, 1:50,000 and 1:25,000 are the common ones (1:1,000,000 for small-scale overview sheets); 1:50,000 is the standard sheet used in schools and colleges.
2. Topomaps Q.1: (4) What are contours? (5) What does the spacing of contours indicate? (6) What are conventional signs?
Answer: (4) Contours are imaginary lines on a map joining points of the same height above mean sea level; on Survey of India maps they are brown and usually 20 m apart. (5) Spacing shows slope: closely spaced contours mean a steep slope, widely spaced contours a gentle slope, evenly spaced contours a uniform slope, and no contours flat land. (6) Conventional signs are standard, internationally understood symbols, colours and letters used on maps to show features such as roads, railways, rivers, wells, temples and boundaries, so that a map can be read without words; they are explained in the legend at the foot of each sheet.
3. Topomaps Q.2: Describe the conventional signs for (1) international boundary (2) villages (3) footpath with bridges (4) bench mark (5) places of worship (6) railway lines (7) metalled road.
Answer: (1) International boundary — a black dash-and-dot line (often with crosses), edged with a band of colour. (2) Villages — built-up areas shaded or huts shown as small squares in red; names written beside them. (3) Footpath with bridge — a dashed (pecked) line with the bridge drawn as short paired marks across the stream. (4) Bench mark — the letters BM with a dot and the surveyed height, e.g. BM • 245, in black. (5) Places of worship — small red symbols: a temple with a pointed shikhara, a mosque with domes, a church with a cross (with a letter such as T, M or C on some sheets). (6) Railway — a black line with short cross-bars (single or double line drawn with one or two bars; broad, metre and narrow gauge differ in thickness). (7) Metalled road — two parallel black lines filled with red, often with distance stones marked.
4. Practical 4: Calculate the specific gravity from these readings (true weights). Quartz: Wa 13.25 g, Ww 8.25 g. Calcite: Wa 10.84 g, Ww 6.84 g. Barite: Wa 18.00 g, Ww 14.00 g.
Answer: Quartz: 13.25 ÷ 5.00 = 2.65. Calcite: 10.84 ÷ 4.00 = 2.71. Barite: 18.00 ÷ 4.00 = 4.50. All match the accepted values, so the barite is clearly the 'heavy spar'. (If the readings are beam positions on Walker's steelyard rather than weights, use SG = Rw ÷ (Rw − Ra).)
5. Practical 13: Explain the step-by-step procedure for drawing a topographic profile along X–Y and how you would describe the map.
Answer: Join X and Y with a straight line. Lay a paper strip along it, mark X and Y, and tick every point where a contour crosses, writing its height. Draw a base line of the same length on graph paper, transfer the ticks, and erect vertical lines at X and Y. Choose the vertical scale (e.g. 1 cm = 100 m) and plot each tick at its height; join the points with a smooth curve and label hills, valleys, spurs and saddles, adding both scales. In the description, name each feature with its position on the map, height, slope (steep or gentle side for asymmetrical hills), flow direction of valleys, orientation of ridges with their saddles, and slope direction of spurs.
6. Practical 3 and 8: You are given colourless specimens of quartz, calcite, gypsum and fluorite. How will you identify each using simple tests?
Answer: Gypsum — scratched by a fingernail (H 2), pearly lustre, no fizz with acid. Calcite — not scratched by a fingernail but easily by a copper coin or knife (H 3), breaks into rhombs (three cleavages), fizzes strongly with cold dilute HCl, and shows double images through clear pieces (Iceland spar). Fluorite — scratches calcite but is scratched by a knife (H 4), breaks into octahedra (four cleavages), no fizz, may glow under UV. Quartz — scratches glass and a knife (H 7), no cleavage, conchoidal fracture, vitreous lustre, six-sided prisms with pointed ends.
7. Practical 16: Write short notes on any three geoheritage sites of Maharashtra and explain why they should be conserved.
Answer: Lonar crater, Buldhana: a nearly circular bowl about 1.8 km across and 150 m deep with a saline, alkaline lake, blasted into Deccan basalt by a meteorite; shock-formed maskelynite proves the impact origin. Nighoj potholes, Ahmednagar: in the Kukadi river bed, pebbles whirled by eddies have drilled cylindrical potholes of many sizes into basalt along a narrow inner channel about 300 m long. Columnar joints at Panhala, Tumzai and Gilbert Hill: thick lava flows that cooled slowly contracted and cracked into vertical five- and six-sided columns. Conservation: these sites are natural laboratories for students and scientists, record events that cannot be repeated (an impact, the Deccan eruptions), support geotourism and local income, and once quarried, built over or polluted they are lost forever — so they need legal protection, signboards, controlled access and public awareness.
8. Practical 18: How will you plan and carry out fieldwork safely, and what will your field report contain?
Answer: Before: study the topomap and geological map, mark the places to visit, the roads, villages and nearest help; plan a route that crosses many rock types and ends where transport is available; check the weather and avoid monsoon floods and high tides; prepare a checklist — topomap, compass–clinometer, hammer, hand lens, notebook, sample bags, camera, helmet, safety glasses, field shoes, water, food, first-aid kit, rope and tape — and tell someone your plan. During: start early and return before dark, stay with the group and teacher, keep away from cliff edges, unstable quarry faces and traffic at road cuttings, wear glasses while hammering, respect local people and wildlife, collect only what is needed and nothing at protected sites, and record every observation with location, sketch and a photo with a scale. Report: title, date, location map, aim, route, observations at each stop (rocks, minerals, structures such as meanders, potholes, columnar joints, red boles, spheroidal weathering), labelled sketches and photos, interpretation and conclusion.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. A streak plate cannot give a streak for minerals harder than about…
Answer: B. Unglazed porcelain is about 6.5–7 on Mohs' scale.
2. A mineral weighs 45 g in air and 35 g in water. Its SG is…
Answer: A. 45 ÷ (45 − 35) = 4.5, like barite.
3. Walker's steelyard balance is used to find…
Answer: C. It compares weight in air and in water.
4. Topomaps in India are prepared by the…
Answer: D. Headquartered at Dehradun.
5. On a 1:50,000 map, 1 km on the ground is shown by…
Answer: C. 1 cm = 500 m.
6. A contour line joins points of equal…
Answer: D. Measured above mean sea level.
7. Widely spaced contours indicate…
Answer: C. Height changes slowly over distance.
8. Closed contours decreasing toward the centre show a…
Answer: D. The ground is lower in the middle.
9. V-shaped contours pointing toward higher ground show a…
Answer: D. Streams cut V's that point upstream.
10. The low point on a ridge between two hills is a…
Answer: D. It is the easiest place to cross the ridge.
11. Thicker, labelled contours are called…
Answer: D. Usually every fifth contour.
12. Maskelynite at Lonar shows that the crater was formed by…
Answer: B. It needs extreme shock pressure.
13. Honeycomb weathering is seen in basalt at…
Answer: A. Salt spray on the Raigad coast.
14. The Sandhan valley is an example of a…
Answer: C. Far deeper than it is wide.
15. The instrument that measures dip or slope angle is a…
Answer: B. A compass gives direction; a clinometer gives angle.
Get a ✓ Verified tutor for “Practical Exercises” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Practical Exercises the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “Practical Exercises” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Practical Exercises.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Practical Exercises” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.