TalentJR apps
Textbook: Chemistry – Class 12 (Balbharati, official free PDF) · pages 28–46
Why does salt on icy roads melt the ice, why do doctors use 0.9 % saline drips, and how is sea water turned into drinking water? This chapter covers types of solutions, solubility and Henry's law, Raoult's law and ideal versus non-ideal solutions, and the four colligative properties — vapour pressure lowering, boiling point elevation, freezing point depression and osmotic pressure — with van't Hoff factor and every exercise numerical solved step by step.
A solution is a homogeneous mixture of a solute in a solvent. Solid, liquid and gaseous solvents and solutes combine into nine types; aqueous solutions are the most common.
Solubility of solids usually rises with temperature (exceptions such as Ce₂(SO₄)₃ show the reverse). Gas solubility falls as temperature rises but rises with pressure: Henry's law, S = K_H P.
Raoult's law: in a solution of volatile liquids each partial pressure equals the mole fraction times the pure vapour pressure. Ideal solutions obey it at all compositions (ΔH_mix = 0, ΔV_mix = 0); non-ideal solutions show positive or negative deviations.
Colligative properties depend only on the number of solute particles: relative lowering of vapour pressure = x₂, ΔT_b = K_b m, ΔT_f = K_f m and π = CRT (= MRT). Each can be used to find the molar mass of a solute.
Electrolytes give more particles than the formula suggests, so a van't Hoff factor i is introduced: ΔT_f = iK_f m, π = iCRT, and α = (i − 1)/(n − 1) for dissociation.
Get a ✓ Verified tutor for “Solutions” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
4.5 g of glucose (C₆H₁₂O₆) is dissolved in 250 g of water. Find the molality and the mole fraction of glucose.
Answer: 0.10 m; x(glucose) = 1.8 × 10⁻³
The solubility of CO₂ in water at 25 °C and 1 atm is 0.034 mol L⁻¹. A soft drink is bottled under 4.0 atm of CO₂. How much CO₂ (in g) is dissolved in a 500 mL bottle?
Answer: About 3.0 g of CO₂
At 25 °C, pure benzene has P⁰ = 95 mm Hg and pure toluene 28 mm Hg. A solution has 1 mol benzene and 3 mol toluene. Find the total vapour pressure and the mole fraction of benzene in the vapour.
Answer: P = 44.75 mm Hg; y(benzene) = 0.53
2.40 g of an unknown non-electrolyte in 75.0 g of benzene lowers the freezing point by 0.82 K. K_f(benzene) = 5.12 K kg mol⁻¹. Find its molar mass.
Answer: About 200 g mol⁻¹
A protein solution has 1.50 g in 100 mL and shows an osmotic pressure of 6.0 mm Hg at 27 °C. Find the molar mass. (R = 0.08205 L atm K⁻¹ mol⁻¹)
Answer: About 4.7 × 10⁴ g mol⁻¹ (a typical protein)
A 0.20 m aqueous solution of MgCl₂ freezes at −0.98 °C. Find i and the degree of dissociation. (K_f = 1.86 K kg mol⁻¹)
Answer: i ≈ 2.63; α ≈ 0.82 (82 % dissociated)
| Quantity | Formula | Note |
|---|---|---|
| Henry's law | S = K_H P | K_H in mol L⁻¹ atm⁻¹ |
| Raoult's law (volatile) | P₁ = x₁P₁⁰; P = x₁P₁⁰ + x₂P₂⁰ | ideal solutions |
| Relative lowering of VP | (P₁⁰ − P)/P₁⁰ = x₂ ≈ W₂M₁/(M₂W₁) | non-volatile solute |
| Boiling point elevation | ΔT_b = iK_b m | water K_b = 0.52 K kg mol⁻¹ |
| Freezing point depression | ΔT_f = iK_f m | water K_f = 1.86 K kg mol⁻¹ |
| Molar mass from ΔT | M₂ = 1000 K W₂ ÷ (ΔT W₁) | W in grams |
| Osmotic pressure | π = iCRT; M₂ = W₂RT/(πV) | R = 0.08205 L atm K⁻¹ mol⁻¹ |
| van't Hoff factor | i = observed ÷ theoretical | = normal M ÷ observed M |
| Degree of dissociation | α = (i − 1)/(n − 1) | n = ions per formula unit |
Solve each one in your notebook first. Then open the solution and compare every step.
1. 1. Choose the correct option. (i) VP of a solution of 2 mol solute in 2 mol water (P⁰ = 24 mm Hg): 24 / 32 / 48 / 12 mm Hg. (ii) The colligative property: vapour pressure / boiling point / osmotic pressure / freezing point. (iii) In calculating π concentration is expressed as: molarity / molality / mole fraction / mass %. (iv) K_b is ΔT_b for: 1 m / 1 M / 1 mass % / x = 1. (v) K_f depends on: nature of solvent / solute / solution / number of solvent molecules. (vi) Correct statement: VP of solution higher than solvent / bp of solvent lower than that of solution / π of solution lower than solvent / osmosis is a colligative property.
Answer: (i) d. 12 mm Hg (ii) c. osmotic pressure (iii) a. molarity (iv) a. 1 m (v) a. nature of solvent (vi) b
2. 1. (vii) A cell is isotonic with 0.3 M sugar. What osmotic pressure develops in 0.1 M KCl at body temperature? (viii) π of blood is 7.65 atm at 310 K; % of glucose isotonic with blood? (ix) VP of a solution is directly/inversely proportional to the mole fraction of solute/solvent? (x) Pressure cooker reduces cooking time because… (xi) K_H for CH₃Br is 0.159 mol dm⁻³ atm⁻¹; solubility at 0.164 atm? (xii) Which is NOT correct for 0.1 M urea and 0.05 M sucrose?
Answer: (vii) b. 2.54 atm (viii) a. 5.41 % (w/v; the book says 'by volume') (ix) d (x) a (xi) c. 0.026 M (xii) c. they are isotonic solutions
3. 2. Answer in one or two sentences: (i) osmotic pressure; (ii) why molarity for π; (iii) equation for ΔT_b; (v) van't Hoff factor; (vi) relation with degree of ionization; (vii) higher ΔT_f: 0.1 m NaCl or 0.05 m Al₂(SO₄)₃; (viii) Raoult's law, non-volatile solute; (ix) adding 1 mol methyl alcohol to 1 dm³ water; (x) property used most for molar mass.
Answer: (i) The extra pressure that must be applied to a solution to just prevent solvent from entering it through a semipermeable membrane. (ii) π is measured at a fixed temperature and the equation π = (n/V)RT is based on volume of solution. (iii) ΔT_b = K_b m. (v) i = observed colligative property ÷ value calculated assuming no dissociation or association. (vi) α = (i − 1)/(n − 1). (vii) 0.05 m Al₂(SO₄)₃, because it gives more particles (0.25 m vs 0.20 m). (viii) The vapour pressure of the solution equals the vapour pressure of the pure solvent times the solvent's mole fraction: P = x₁P₁⁰. (ix) The boiling point is lowered, because methanol is volatile (b.p. 65 °C) and adds its own vapour pressure — the solution's vapour pressure rises. (x) Osmotic pressure — large, measurable values even for dilute solutions, at room temperature, so it suits proteins and polymers.
4. 2. (iv) A 0.1 m solution of K₂SO₄ freezes at −4.3 °C. Find i if K_f = 1.86 K kg mol⁻¹. 3. (iv) π of CaCl₂ and urea solutions of the same concentration and temperature are 0.605 atm and 0.245 atm. Find i for CaCl₂.
Answer: 2(iv) The book prints −4.3 °C; the freezing point must be −0.43 °C, giving i = 2.31. 3(iv) i = 2.47.
5. 3. Answer: (i) VP lowering and rise in boiling point; (ii) isotonic and hypertonic solutions; (iii) does solvent flow both ways across the membrane?; (v) reverse osmosis; (vi) molar mass from π; (vii) why a non-volatile solute lowers VP; (viii) show ΔP = P₁⁰x₂; (ix) why molality for ΔT.
Answer: (i) Lower vapour pressure means the solution reaches atmospheric pressure only at a higher temperature; ΔT_b is proportional to ΔP and hence to molality. (ii) Isotonic: equal osmotic pressure at the same temperature; hypertonic: higher osmotic pressure than the other solution. (iii) Yes — solvent molecules cross in both directions, but more move from the solvent into the solution, so there is a net flow until π is reached. (v) If a pressure larger than π is put on the solution, pure solvent is squeezed out through the membrane; used for desalination with cellulose acetate membranes. (vi) Measure π of a solution of known mass W₂ in volume V at T and use M₂ = W₂RT/(πV). (vii) Solute particles take up part of the surface and lower the escaping tendency of solvent molecules. (viii) Shown above. (ix) Molality depends on masses and does not change with temperature, while molarity does — and these measurements are made at different temperatures.
6. 4. Derive the relation between degree of dissociation and i. 5. Effect of temperature on solubility of solids. 6. Relation of ΔT_f with molar mass. 7. Explain ΔT_b with a diagram.
Answer: 4. α = (i − 1)/(n − 1). 5. If dissolving absorbs heat (KCl, NaNO₃, KNO₃, NH₄Cl), solubility rises with temperature; if it releases heat (Li₂SO₄, Ce₂(SO₄)₃), solubility falls; for NaCl the change is small. 6. M₂ = 1000 K_f W₂ ÷ (ΔT_f W₁). 7. Plot vapour pressure against temperature: the solution's curve lies below the solvent's. The solvent's curve meets 1 atm at T_b⁰; the solution's meets 1 atm at a higher T_b; the gap is ΔT_b.
7. 8. Fish need at least 3.8 mg L⁻¹ of O₂. Solubility of O₂ at 0 °C and 1 atm is 2.2 × 10⁻³ mol L⁻¹. What partial pressure of O₂ is needed? 9. VP of water at 20 °C is 17 mm Hg. Find the VP of a solution of 2.8 g urea in 50 g water. (book: 16.17 mm Hg)
Answer: 8. 0.054 atm. 9. 16.72 mm Hg — the book prints 16.17 mm Hg, which is a slip (digits swapped); the correct answer is 16.72 mm Hg.
8. 10. A 5 % (by mass) cane sugar solution (M = 342) freezes at 271 K. Find the freezing point of a 5 % glucose solution. 11. Citric acid in 50 g acetic acid raises the boiling point by 1.76 K; K_b = 3.07 K kg mol⁻¹. Molality?
Answer: 10. 269.06 K. 11. 0.573 m (both match the book).
9. 12. An aqueous solution has density 1.063 g mL⁻¹, π = 12.16 atm at 25 °C and freezes at −1.03 °C. Find the molar mass. (book: 334 g mol⁻¹)
Answer: ≈ 333 g mol⁻¹ (book 334; the difference is rounding of R).
10. 13. A benzene–toluene mixture has 30 % toluene by mass. At 30 °C, P⁰(toluene) = 36.7 mm Hg, P⁰(benzene) = 118.2 mm Hg. Find the partial and total pressures.
Answer: P(benzene) = 86.7 mm Hg, P(toluene) = 9.8 mm Hg, total = 96.5 mm Hg.
11. 14. At 25 °C a 0.1 molal CH₃COOH solution is 1.35 % dissociated. Find its freezing point and osmotic pressure (m ≈ M). 15. 0.15 m KCl freezes at −0.510 °C. Find i and π at 0 °C.
Answer: 14. −0.189 °C; 2.48 atm. 15. i = 1.83; π = 6.15 atm (all match the book).
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. The concentration term independent of temperature is…
Answer: A. Molality uses only masses.
2. Henry's law constant has unit…
Answer: A. From S = K_H P with S in mol L⁻¹.
3. For an ideal solution…
Answer: C. No change in interactions.
4. A mixture showing negative deviation from Raoult's law is…
Answer: D. C–H…O hydrogen bonds form between unlike molecules.
5. Which is NOT a colligative property?
Answer: A. Lowering of vapour pressure is colligative; vapour pressure itself is not.
6. Mole fraction of solute is 0.04. Relative lowering of vapour pressure is…
Answer: B. ΔP/P⁰ = x₂.
7. K_f of a solvent depends on…
Answer: C. K_f = RT_f²M₁/(1000ΔH_fus) — solvent only.
8. Which aqueous solution has the highest boiling point?
Answer: C. i × m = 0.3, largest.
9. Osmotic pressure of 0.1 M glucose at 300 K is about…
Answer: A. 0.1 × 0.0821 × 300.
10. A cell placed in a hypertonic solution…
Answer: A. Water moves out of the cell.
11. Reverse osmosis requires a pressure on the solution that is…
Answer: C. Only then does solvent flow out of the solution.
12. Ideal van't Hoff factor for Al₂(SO₄)₃ is…
Answer: B. 2Al³⁺ + 3SO₄²⁻ = 5 ions.
13. A solute dimerises completely in benzene. i is…
Answer: B. Two molecules become one particle.
14. Soda water fizzes when opened because…
Answer: D. Lower pressure → lower solubility (Henry's law).
15. Why does salt sprinkled on ice melt it?
Answer: C. Brine freezes below 0 °C.
Get a ✓ Verified tutor for “Solutions” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Solutions the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 80 minutes
Get a ✓ Verified tutor for “Solutions” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Solutions.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Solutions” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.