TalentJR apps
Textbook: Geology – Class 12 (Balbharati, official free PDF) · pages 1–12
Earth looks calm, yet its insides are hot, moving and constantly reshaping the surface. This chapter explains the layered interior of the Earth, the long story from continental drift to plate tectonics, the three kinds of plate boundary and the main types of mountains, with Indian examples — and every exercise answered.
Earth formed from the solar nebula about 4.56 billion years ago (Ga). As it grew and cooled, heavy iron and nickel sank to the centre and lighter silicates rose, so the planet became layered: crust, mantle and core. Temperature rises from about 15 °C at the surface to roughly 6000 °C at the centre, but not in a straight line — the gradient bends at each compositional boundary.
Heat moves outward by conduction, convection and advection. Convection in the mantle is the main engine that moves the lithospheric plates; advection (rising magma) builds new ocean floor and feeds volcanic eruptions. The liquid outer core convects too and generates Earth's magnetic field, which shields the surface from the charged particles of the solar wind.
Seismic waves reveal boundaries (discontinuities) inside the Earth: Mohorovičić (crust–mantle), Repetti (upper–lower mantle), Gutenberg (mantle–core) and Lehmann (outer–inner core). The rigid lithosphere (crust plus uppermost mantle) rides on the weak, plastic asthenosphere.
Continental drift was argued with growing evidence from Bacon (1620) to Wegener (1912–1915): fit of coastlines, matching fossils such as Glossopteris and Mesosaurus, matching mountain belts and rocks, and ancient climate clues. It lacked a convincing driving force until post-war ocean-floor mapping, seafloor spreading (Hess, Dietz) and magnetic stripes (Vine and Matthews, 1963) led to plate tectonics in the 1960s.
Plates meet at divergent (constructive), convergent (destructive) and transform (conservative) boundaries. Mountains are fold, fault-block, volcanic or relict (residual) types — the Himalaya are fold mountains, the Satpura are treated as fault-block, Barren Island is a volcano and the Sahyadri are relict mountains carved by erosion.
Get a ✓ Verified tutor for “The Dynamic Earth” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A seismic station on the far side of the Earth from an earthquake records P-waves but no S-waves. What does this tell us about the core?
Answer: Part of the core — the outer core — must be liquid. This is how Gutenberg located the core boundary near 2900 km.
A magnetic stripe 50 km from a ridge axis is 2.5 million years old. What is the half-spreading rate, and how fast are the two plates separating?
Answer: Half-spreading rate 2 cm/yr; the plates separate at about 4 cm/yr (full spreading rate).
| Layer | Depth / thickness | What it is like |
|---|---|---|
| Continental crust | 0 to 20–70 km | Granitic, light (about 2.7 g/cm³), old |
| Oceanic crust | 0 to 5–10 km | Basaltic, denser (about 3.0 g/cm³), under 200 Ma old |
| Lithosphere | Down to about 100 km (up to 250 km under old continents) | Rigid crust + top of mantle; broken into plates |
| Asthenosphere | About 100–250 km | Hot, weak, flows plastically; plates glide over it |
| Lower mantle | About 660–2890 km | Hot, viscous silicates (bridgmanite) |
| Outer core | About 2890–5150 km | Liquid Fe–Ni; convection makes the magnetic field |
| Inner core | About 5150–6371 km | Solid Fe–Ni because of huge pressure; about 6000 °C |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Choose the correct alternative: (1) Difference between the temperature of the Universe and Earth's interior is of the order of … (2) Lower boundary of mantle convection is at about … km. (3) The inner core remains solid due to … (4) When two plates collide they form …
Answer: (1) d) 6000 °C (about 6000 − (−270) ≈ 6270 °C, of the order of 6000 °C). (2) c) 2900 km. (3) a) increase in the melting point of the compound due to increase in pressure. (4) d) fold mountains.
2. Q.2 Very short answers: (1) How do convection currents maintain the temperature of the mantle? (2) What controls the temperature gradient of the Earth? (3) What is the main driving force for plate motion? (4) Why has Earth's radius increased since its early stage?
Answer: (1) Hot material rises from the deep mantle and cooler material sinks, so heat is continually mixed and carried upward; this keeps the mantle hot and its temperature fairly even within each layer. (2) The compositional layering of the Earth (crust, mantle, outer core, inner core) together with the heat sources — primordial heat and radioactive decay — and the way heat moves (conduction, convection, advection); the gradient bends at each layer boundary. (3) Convection currents in the mantle (helped by the pull of sinking slabs). (4) The young Earth kept sweeping up planetesimals and dust from its orbit, so mass was added and the radius grew.
3. Q.3 (1) Two differences between continental and oceanic crust. (2) Himalaya and Sahyadri are different types of mountains — justify. (3) Two properties of the asthenosphere. (4) Two landmasses that formed from the breakup of Pangaea.
Answer: (1) Continental crust is thick (20–70 km), lighter and granitic, and old (up to about 4 Ga); oceanic crust is thin (5–10 km), denser and basaltic, and young (under about 200 Ma). (2) The Himalaya are young fold mountains raised by the collision of the Indian and Eurasian plates and are still rising. The Sahyadri are relict mountains: the edge of the Deccan basalt plateau was cut back and dissected by rivers and rain, leaving high ridges — they owe their form to erosion, not folding. (3) It is hot (about 1300–1450 °C) and close to melting, and it is weak and flows plastically, letting the rigid plates move over it. (4) Laurasia (North America, Europe, Asia) and Gondwana (South America, Africa, India, Australia, Antarctica); e.g. South America separated from Africa, and India separated from Antarctica and Africa.
4. Q.4 (1) Three evidences that continents have drifted. (2) How magnetic stripes explain plate tectonics. (3) Example of a divergent continental margin. (4) How relict mountains form.
Answer: (1) Fit of the continents (South America and Africa match at the shelf edge); the same fossils such as Glossopteris and Mesosaurus on continents now separated by ocean; matching mountain belts and rock types (Appalachians–Caledonides); also palaeoclimate (ancient glacial deposits in India and Africa). (2) At a ridge, rising magma cools and its magnetic minerals line up with Earth's field of that time. The field reverses every so often, so the cooling crust records bands of normal and reversed polarity. The bands are parallel to the ridge, mirror each other on both sides and get older away from the ridge, proving that the floor is being created and pushed apart — the plates move. (3) The East African Rift Valley (also the Rhine Graben). (4) A high plateau or old range is worn down unevenly; soft or jointed rocks erode away quickly while resistant rocks remain as ridges and peaks. The remaining highlands are relict mountains, e.g. the Sahyadri cut from Deccan basalts.
5. Q.5 (1) Tectonic activity at the western margin of the South American plate. (2) Limitations of continental drift and how plate tectonics resolved them. (3) Types of plate boundary, with the Indian-Australian plate. (4) Note on the San Andreas Fault. (5) Internal layering of the Earth.
Answer: (1) The oceanic Nazca plate moves east and subducts beneath the continental South American plate at the Peru–Chile trench (ocean–continent convergence). Friction causes very large earthquakes (Chile 1960, magnitude 9.5 — the largest recorded). The sinking slab releases water at about 100 km depth, melting the mantle above; magma rises to build the volcanic Andes (e.g. Cotopaxi). Compression also folds and thrusts the crust, raising the range. (2) Drift could not explain what moved the continents, wrongly imagined continents ploughing through rigid ocean floor, and lacked data from the oceans. Plate tectonics says the whole lithosphere (continent plus ocean floor) moves as rigid plates on the asthenosphere, driven by mantle convection, ridge push and slab pull; seafloor spreading, symmetrical magnetic stripes, young ocean-floor ages, earthquake belts and GPS measurements supply the proof. (3) Divergent — plates separate and new crust forms: Indian plate along the Carlsberg Ridge and Central/South-East Indian Ridges. Convergent — plates meet and one subducts or both crumple: India–Eurasia collision forming the Himalaya; subduction under the Andaman–Sumatra arc (2004 tsunami earthquake). Transform — plates slide past: Owen Fracture Zone, Chaman Fault (Pakistan–Afghanistan), Sagaing Fault (Myanmar). (4) The San Andreas Fault runs about 1200 km through California from the Gulf of California to Cape Mendocino. It is a right-lateral transform boundary where the Pacific plate moves north-west past the North American plate at about 3–5 cm per year. It links spreading ridges at each end. Strain stored on locked parts is released in quakes such as San Francisco 1906 and Loma Prieta 1989; Los Angeles and San Francisco lie close to it. (5) Crust (continental 20–70 km granitic; oceanic 5–10 km basaltic) — Moho — upper mantle with lithosphere and plastic asthenosphere, to about 660 km — Repetti discontinuity — lower mantle to about 2900 km — Gutenberg discontinuity — liquid Fe–Ni outer core to about 5150 km — Lehmann discontinuity — solid inner core to the centre at 6371 km, about 6000 °C. Density and temperature increase with depth.
6. Q.6 Unseen passage on density (Brown and Mussett): (1) What is meant by 'reasonable precision' in finding density? (2) How is the density of the whole Earth found? (3) How is the composition at great depth found? (4) How are density, mass, temperature and pressure related?
Answer: (1) Density inside the Earth cannot be measured directly, so it is calculated; the result is not exact but lies within narrow, dependable limits at most depths. (2) Earth's mass is found from its gravitational pull; its moment of inertia comes from the precession of its axis; these are combined with seismic wave speeds at each depth to work out how density changes inward. Mean density is mass ÷ volume ≈ 5.5 g/cm³. (3) By finding materials whose density and seismic speeds, measured in high-pressure laboratory experiments, match the calculated values at each depth, and by comparing with meteorites and mantle rocks brought up by volcanoes. (4) Density = mass ÷ volume. Higher pressure squeezes material and raises density; higher temperature expands it and lowers density. Inside the Earth pressure wins, so density increases with depth (from about 2.7 g/cm³ in the crust to about 13 g/cm³ in the inner core), with jumps where composition changes.
7. Q.7 Unseen passage on mantle convection (Davies): (1) How is the crust linked to the mantle? (2) Distinguish kinematic and dynamic aspects. (3) How does the author use mantle plumes?
Answer: (1) Forces from convection in the mantle cause crustal deformation, earthquakes, magmatism and metamorphism, so the crust's behaviour is driven from below. (2) Kinematic: plate tectonics describes how plates move — directions, speeds, boundary types. Dynamic: mantle convection explains why they move — heat, buoyancy and the forces involved. (3) Plumes are columns of hot material rising from deep in the mantle, a separate style of convection not explained by plate tectonics. They produce hotspot volcanoes and huge lava floods such as Hawaii and the Deccan Traps (Réunion plume), showing both forces (dynamic) and resulting motions (kinematic) beyond plate edges.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. The inner core remains solid because…
Answer: B. Pressure wins over temperature at the centre.
2. Mantle convection is important because it…
Answer: A. Rising and sinking mantle drags the plates.
3. Earth's magnetic field is generated in the…
Answer: D. Moving liquid iron acts as a dynamo.
4. The boundary between crust and mantle is the…
Answer: A. Named after Andrija Mohorovičić.
5. Which layer behaves plastically?
Answer: A. It is close to melting and flows slowly.
6. Compared with continental crust, oceanic crust is…
Answer: B. Basaltic, 5–10 km, denser.
7. Wegener's supercontinent was called…
Answer: A. Pangaea means all lands.
8. Glossopteris fossils support drift because they…
Answer: A. A land plant could not cross oceans.
9. Symmetrical magnetic stripes are found…
Answer: D. Evidence of seafloor spreading.
10. A constructive plate margin is a … boundary.
Answer: C. New lithosphere is created.
11. The Andes formed by … convergence.
Answer: C. Nazca plate subducts under South America.
12. San Andreas Fault is a … boundary.
Answer: B. Pacific and North American plates slide past.
13. When two plates collide they are likely to form…
Answer: D. Compression folds the rocks.
14. Barren Island is an example of a…
Answer: B. It is an active volcano.
15. The East African Rift is an example of…
Answer: C. Africa is splitting apart.
Get a ✓ Verified tutor for “The Dynamic Earth” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise The Dynamic Earth the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 40 minutes
Get a ✓ Verified tutor for “The Dynamic Earth” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of The Dynamic Earth.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “The Dynamic Earth” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.