TalentJR apps
Textbook: Geology – Class 12 (Balbharati, official free PDF) · pages 13–27
Every building stone, road metal and ore host is a rock with a story. This chapter goes deeper than Class 11: igneous minerals, textures, structures and the shapes of igneous bodies; how sediments become rock and the structures they keep; the structures of metamorphic rocks; and how engineers choose building stones — with every exercise answered.
Petrology is the science of rocks; petrography describes and classifies them and petrogenesis explains their origin. A rock is a natural aggregate of minerals — usually several (granite) but sometimes one (dunite is almost pure olivine; marble is mostly calcite).
Igneous rocks crystallise from magma or lava. Their minerals are primary (essential or accessory) or secondary (filling cavities later). They are classified by depth (plutonic, hypabyssal, volcanic), by silica (acidic > 65%, intermediate 55–65%, basic 45–55%, ultrabasic < 45%) and by colour index (leucocratic to hypermelanocratic). Textures are equigranular or inequigranular (porphyritic); structures include vesicular, amygdaloidal, ropy, columnar and pillow.
Magma that does not reach the surface forms intrusive bodies. Concordant ones run parallel to layering — sill, laccolith, lopolith, phacolith; discordant ones cut across it — dyke and batholith (with stocks and bosses). Lava flows, such as the Deccan Traps, are the extrusive form.
Sedimentary rocks form by weathering, erosion, transport, deposition and lithification. They are residual (laterite, bauxite) or transported; transported rocks are clastic (rudaceous, arenaceous, argillaceous by grain size) or non-clastic (chemical: rock salt, gypsum, chert, limestone; organic: diatomite, chalk, guano, bog iron, coal). Stratification, cross bedding, graded bedding and ripple marks record how they were laid down.
Metamorphic rocks form in the solid state under heat, pressure and chemically active fluids. Cataclastic, thermal (contact) and dynamothermal (regional) metamorphism produce slaty cleavage, granulose, schistose and gneissose structures. Engineers judge building stones by crushing and transverse strength, porosity, density, abrasion, frost and fire resistance, durability and appearance.
Get a ✓ Verified tutor for “Petrology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
A dark rock has 49% SiO₂, no quartz, and crystals about 1–2 mm. It occurs as a wall-like body cutting basalt flows. Name it.
Answer: Dolerite — the hypabyssal equivalent of basalt and gabbro.
A sandstone has 30% feldspar along with quartz. What does the feldspar tell you?
Answer: It is an arkose, derived from a nearby granite and deposited quickly without much chemical weathering.
| Rock | Group and class | Identify it by |
|---|---|---|
| Granite | Igneous — plutonic, acidic | Coarse, equigranular; quartz + feldspar + mica |
| Dolerite | Igneous — hypabyssal, basic | Medium-grained dark rock in dykes and sills |
| Basalt | Igneous — volcanic, basic | Fine-grained, dark; vesicles, amygdales, columns |
| Conglomerate | Sedimentary — rudaceous | Rounded pebbles in matrix |
| Sandstone | Sedimentary — arenaceous | Sand grains; gritty feel |
| Shale | Sedimentary — argillaceous | Very fine, laminated, splits in thin layers |
| Rock salt / gypsum | Sedimentary — chemical (evaporite) | Salt tastes salty; gypsum scratched by nail |
| Marble | Metamorphic — thermal | Granulose calcite; fizzes with dilute HCl |
| Mica schist | Metamorphic — dynamothermal | Shiny parallel mica flakes |
| Gneiss | Metamorphic — dynamothermal | Light and dark bands |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Q.1 Correct answers: (1) discordant body; (2) hypabyssal equivalent of basalt; (3) rounded grains; (4) sedimentary structure; (5) thermal metamorphism of sandstone; (6) foliation; (7) concordant bodies; (8) wavy pattern on beach sand; (9) match syenite, rhyolite, granite, pegmatite; (10) match residual, chemical, argillaceous, organic; (11) match slaty cleavage, gneissose, schistose, granulose.
Answer: (1) d) batholith. (2) b) dolerite. (3) c) conglomerate. (4) d) cross bedding. (5) c) quartzite. (6) b) dynamothermal metamorphism. (7) c) sill, laccolith, lopolith. (8) a) ripple marks. (9) C — syenite: plutonic intermediate; rhyolite: volcanic acidic; granite: plutonic acidic; pegmatite: hypabyssal acidic (book). (10) D — residual: bauxite; chemical: limestone; argillaceous: shale; organic: phosphorite. (11) B — slaty cleavage: cataclastic (book); gneissose: alternate light and dark bands; schistose: parallel arrangement; granulose: thermal metamorphism.
2. Q.2 Answer: (1) What is a rock? (2) Texture of rocks? (3) Texture with large variation in grain size? (4) Two evaporites. (5) Stratification? (6) Graded bedding? (7) Metamorphism? (8) Confining pressure? (9) Directed pressure?
Answer: (1) A natural aggregate of one or more minerals (sometimes with glass or organic matter). (2) The size, shape, arrangement and mutual relation of the grains and any glass in a rock. (3) Inequigranular — especially porphyritic texture. (4) Rock salt (halite) and gypsum. (5) Layering in sedimentary rocks produced as conditions of deposition change with time. (6) A bed in which grain size decreases from coarse at the bottom to fine at the top, because heavier grains settle first as a current slows. (7) Change in the minerals and structure of a solid rock in response to new temperature, pressure and chemically active fluids, without melting. (8) Uniform, all-round pressure from the weight of overlying rocks; it increases with depth and reduces volume but does not align minerals. (9) Unequal pressure (stress) in one direction, strongest in tectonic zones; it deforms rocks and aligns minerals to give foliation.
3. Q.3 Brief: (1) extrusive igneous rocks; (2) sills with a diagram; (3) clastic texture; (4) organic deposits; (5) slaty cleavage; (6) thermal metamorphism; (7) factors raising temperature; (8) role of fluids.
Answer: (1) Lava erupted through vents or fissures cools quickly at the surface, giving fine-grained or glassy rocks with vesicles and flow features — e.g. basalt of the Deccan Traps. (2) A sill is a thin tabular sheet of igneous rock intruded along and parallel to bedding planes; top and bottom are parallel and it thins out at the ends; may be simple, multiple or composite. Diagram: horizontal layers with a dark sheet between two of them, fed by a dyke. (3) Clastic texture is the arrangement of broken grains of older rocks bound by a finer matrix and cement, e.g. pebbles in conglomerate or sand grains in sandstone. (4) Deposits made by or from organisms: siliceous (diatomite, radiolarian ooze), calcareous (shell limestone, chalk), phosphatic (guano), ferruginous (bog iron ore) and carbonaceous (coal). (5) Ability of slate to split into thin smooth plates along parallel planes made by flattened and aligned mica flakes under directed pressure (from shale). (6) Metamorphism caused mainly by heat from an intruding magma, with negligible pressure; country rocks recrystallise into granulose rocks — limestone to marble, sandstone to quartzite. (7) Increasing depth (geothermal gradient), nearness of magma or hot igneous intrusions, rising hot gases and solutions, and friction and radioactive decay. (8) Hot water-rich fluids from magma carry dissolved elements; they speed up reactions, help ions move, add or remove material and lower the temperature needed for new minerals to grow.
4. Q.4 Short notes: (1) equigranular texture; (2) laccolith; (3) cross bedding; (4) residual deposits; (5) agents of metamorphism; (6) cataclastic metamorphism.
Answer: (1) When magma cools slowly deep underground, many minerals crystallise together over a long time, so grains grow to about the same size — equigranular or granitic texture, e.g. granite. Sketch: interlocking grains of similar size. (2) A laccolith is a concordant, bun- or mushroom-shaped intrusion with a flat floor and a domed roof. Viscous magma cannot spread far, so it piles up near its feeder and lifts the overlying strata into a dome; diameter a few km. Sketch: dome of bent layers over a lens of igneous rock with a feeder pipe below. (3) Cross bedding is a set of thin inclined layers within a bed, lying at an angle to the main bedding; formed as ripples or dunes migrate and sand slides down their lee faces; the layers dip down-current and are cut off at the top, giving current direction and way-up. Common in dunes, river and beach sand. (4) Insoluble leftovers of chemical weathering that stay in place: laterite (iron and aluminium oxides, red, porous — Konkan), bauxite (aluminium ore — Kolhapur), and soil. (5) Temperature — drives recrystallisation and dehydration; pressure — confining reduces volume, directed aligns minerals and causes foliation; chemically active fluids — carry ions and speed reactions. (6) Metamorphism by directed pressure dominantly, near faults; rocks are crushed, fractured and ground (mylonite, crush breccia) with little or no new mineral growth; the book cites deformed shale developing slaty cleavage (slate).
5. Q.5 Describe: (1) classification of igneous rocks by depth; (2) vesicular and amygdaloidal structure; (3) processes forming sedimentary rocks; (4) classification by grain size; (5) schistose and gneissose structure.
Answer: (1) Plutonic — formed deep (several km), slow cooling, coarse equigranular: granite, syenite, gabbro, dunite. Hypabyssal — at intermediate depth in dykes and sills, medium-grained, often porphyritic: dolerite (and, in the book, pegmatite). Volcanic — at the surface from lava, rapid cooling, fine-grained or glassy, vesicular or flow-banded: rhyolite, trachyte, basalt. (2) Lava rich in gas loses it as pressure falls at the surface; bubbles rise and are trapped in the cooling upper part, leaving cavities — vesicular structure (vesicular basalt). Later, groundwater carrying dissolved silica, calcite or zeolites deposits these minerals in the cavities; the filled vesicles are amygdales and the rock shows amygdaloidal structure (amygdaloidal basalt of the Deccan). (3) Weathering breaks rock into fragments and ions; erosion removes them; transport by water, wind, ice or gravity sorts and rounds them; deposition happens when the current slows; burial compacts the sediment and minerals precipitated in pores cement it (lithification). (4) Rudaceous > 2 mm: boulder, cobble, pebble, gravel → conglomerate, breccia. Arenaceous 2–1/16 mm: sand → sandstone, arkose, grit. Argillaceous < 1/16 mm: silt and clay → siltstone, mudstone, claystone, shale. (5) Schistose: high temperature and strong directed pressure make flaky (micas, chlorite, talc) and prismatic (hornblende) minerals grow parallel, perpendicular to the main stress — mica schist splits along these folia. Gneissose: where both flaky minerals and quartz-feldspar are present, the flaky ones form dark schistose bands and quartz and feldspar recrystallise into light granulose bands; alternating bands make gneiss.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. An example of a discordant intrusion is…
Answer: C. Batholiths cut across host rocks.
2. The hypabyssal equivalent of basalt is…
Answer: A. Same basic composition, medium grain.
3. A sedimentary rock with rounded grains is…
Answer: C. Rounded clasts mean long transport.
4. A structure of sedimentary rocks is…
Answer: B. It forms during deposition.
5. Thermal metamorphism of sandstone gives…
Answer: D. Quartz grains recrystallise.
6. Foliation results mainly from…
Answer: C. Directed pressure aligns minerals.
7. Concordant bodies are…
Answer: D. They lie parallel to layering.
8. Wavy patterns on beach sand are…
Answer: D. Made by waves or currents.
9. Volcanic acidic rock is…
Answer: D. Fine-grained equivalent of granite.
10. Bauxite is a … deposit.
Answer: D. Left behind by weathering.
11. Quartz is absent in … rocks.
Answer: D. Too little silica.
12. Amygdales are vesicles filled with…
Answer: A. e.g. zeolites, calcite.
13. Slaty cleavage is linked in the book with…
Answer: D. Book pairs slate with cataclastic (really low-grade regional).
14. Gneissose structure has…
Answer: A. Granulose and schistose bands alternate.
15. Porosity of a building stone is…
Answer: B. Low porosity resists weathering.
Get a ✓ Verified tutor for “Petrology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Petrology the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 45 minutes
Get a ✓ Verified tutor for “Petrology” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Petrology.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Petrology” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.