TalentJR apps
Textbook: Science – Class 8 (Balbharati, official free PDF) · pages 95–103
Why do rails have gaps and why does a hot air balloon rise? Learn the units of heat, sources of heat, the difference between heat and temperature, Celsius–Fahrenheit–Kelvin conversions, thermometers, specific heat, the calorimeter and the expansion of solids, liquids and gases — with every exercise numerical solved step by step.
Heat is energy that flows from a hotter object to a colder one; temperature tells how hot or cold an object is. The SI unit of heat is the joule and the CGS unit is the calorie: 1 cal = 4.18 J, and 1 calorie raises the temperature of 1 g of water by 1 °C.
Sources of heat: the Sun (nuclear fusion of hydrogen into helium), the Earth's hot interior (geothermal energy), burning fuels (chemical energy), electricity, nuclear fission of uranium or thorium, and the air around us.
Heat in a body depends on the total kinetic energy of its atoms; temperature depends on their average kinetic energy. So a bigger mass at the same temperature holds more heat. Temperature is measured in °C, °F and K: (F − 32)/9 = C/5 and K = C + 273.15.
Thermometers use the expansion of a liquid (now alcohol instead of harmful mercury); clinical thermometers read 35–42 °C, and digital ones use a sensor. Specific heat c is the heat needed to raise 1 unit mass by 1 degree, so Q = m × c × ΔT. A calorimeter, insulated like a thermos flask, measures heat exchanged: heat lost = heat gained.
Solids, liquids and gases expand on heating. Solids show linear (l2 = l1(1 + λΔT)), areal and volume expansion; liquids and gases show volume expansion. A gas in a closed container cannot expand, so its pressure rises; gas expansion is measured at constant pressure. Gaps in rails and bridges allow for expansion.
Get a ✓ Verified tutor for “Measurement and Effects of Heat” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
How much heat is needed to warm 1.5 kg of water from 15 °C to 45 °C? Give the answer in calories and joules.
Answer: 45000 cal, which is 188100 J.
Convert 68 °F into Celsius and kelvin.
Answer: 68 °F = 20 °C = 293.15 K.
A hot copper object at 60 °C is put into a copper calorimeter holding water at 30 °C. The masses of object, water and calorimeter are equal. Find the final temperature (c of copper = 0.09, c of water = 1 cal/(g °C)).
Answer: The final temperature is about 32.29 °C.
By how much does a 0.5 m steel rod lengthen when heated by 60 °C? (λ for steel = 0.000013 /°C)
Answer: The rod becomes 0.00039 m, i.e. 0.039 cm, longer.
| Quantity | Formula | Meaning of letters / unit |
|---|---|---|
| Heat for water | Q (cal) = m (g) × ΔT (°C) | 1 cal = 4.18 J |
| Heat (any substance) | Q = m × c × (Tf − Ti) | c = specific heat, cal/(g °C) or J/(kg °C) |
| °F and °C | (F − 32)/9 = C/5 | Equal at −40 |
| °C and K | K = C + 273.15 | 0 °C ≈ 273 K |
| Calorimeter | Heat lost by object = heat gained by water + calorimeter | Final temperature is common to all |
| Linear expansion | l2 = l1(1 + λΔT); Δl = λ × l1 × ΔT | λ in 1/°C |
| Areal expansion | A2 = A1(1 + σΔT) | σ = areal coefficient |
| Volume expansion | V2 = V1(1 + βΔT) | β = volume coefficient; for gases at constant pressure |
Solve each one in your notebook first. Then open the solution and compare every step.
1. Pair up: (a) Temperature of a healthy human body (b) Boiling point of water (c) Room temperature (d) Freezing point of water — with (i) 296 K (ii) 98.6 °F (iii) 0 °C (iv) 212 °F.
Answer: (a) – (ii) 98.6 °F; (b) – (iv) 212 °F; (c) – (i) 296 K; (d) – (iii) 0 °C.
2. Who is telling the truth? (a) Temperature is measured in joules. (b) Heat flows from a hotter to a colder object. (c) The joule is the unit of heat. (d) Objects contract on heating. (e) Atoms of a solid are free. (f) Average kinetic energy of atoms in a hot object is less than in a cold object.
Answer: (a) False — temperature is measured in °C, °F or K; the joule is a unit of heat. (b) True. (c) True. (d) False — objects expand on heating and contract on cooling. (e) False — atoms of a solid are held in place and only vibrate about fixed positions. (f) False — atoms of a hot object have a greater average kinetic energy.
3. Fill in: (a) A thermometer is used to measure ___. (b) The apparatus used to measure heat is a ___. (c) Temperature is the measure of the ___ kinetic energy of atoms. (d) Heat in a substance is the measure of the ___ kinetic energy of its atoms.
Answer: (a) temperature (b) calorimeter (c) average (d) total.
4. Nishigandha puts the tea ingredients in a solar cooker; Shivani puts a similar vessel on a stove. Whose tea will be ready first, and why?
Answer: Shivani's tea will be ready first. A stove flame supplies a large amount of heat quickly, while a solar cooker collects sunlight slowly, so the same quantity of heat (Q = m × c × ΔT) reaches the vessel in a much shorter time on the stove.
5. Write brief answers: (a) Describe a clinical thermometer and how it differs from a laboratory thermometer. (b) Distinguish heat and temperature and give their units. (c) Explain the construction of a calorimeter with a figure. (d) Why do rails have gaps? (e) Explain with formulae the expansion coefficients of a liquid and a gas.
Answer: (a) A clinical thermometer is a thin glass tube with a bulb of liquid (now alcohol, earlier mercury) and vacuum above; it is marked from 35 °C to 42 °C because human body temperature stays near 37 °C. A laboratory thermometer works the same way but covers a much wider range of temperatures; digital clinical thermometers use a sensor instead. (b) Heat is the total kinetic energy of the atoms and flows from hot to cold; units joule (SI) and calorie (CGS). Temperature tells how hot a body is and depends on the average kinetic energy of the atoms; units °C, °F and K. Two bodies at the same temperature can hold different amounts of heat. (c) Figure: an outer vessel with an inner copper vessel inside it, separated by an air gap and a heat-resistant ring, covered by a heat-resistant lid through which a thermometer and a stirrer pass into the water. The air gap and insulation stop heat moving in or out, so heat lost by a hot object = heat gained by the water and the copper vessel. (d) Rails lengthen when they get hot in summer. The gaps give them room to expand; otherwise they would bend out of shape and could cause accidents. (e) For a liquid, V2 = V1(1 + βΔT), where β is the volume expansion coefficient. For a gas, the volume changes with pressure too, so it is measured at constant pressure: V2 = V1(1 + βΔT), where β is the constant-pressure expansion coefficient. Gases expand far more than liquids (β about 3.66 × 10⁻³ /°C for hydrogen against 0.2 × 10⁻³ /°C for water).
6. At what temperature will the Fahrenheit reading be twice the Celsius reading?
Answer: At 160 °C, which is 320 °F.
7. A bridge is made of 20 m long iron rods. At 18 °C the gap between two rods is 0.4 cm. Up to what temperature will the bridge stay in good shape? (λ for iron = 11.5 × 10⁻⁶ /°C)
Answer: Up to about 35.4 °C.
8. At 15 °C the Eiffel Tower is 324 m tall. If it is made of iron, by how many cm does it grow at 30 °C? (λ = 11.5 × 10⁻⁶ /°C)
Answer: It grows by about 5.6 cm.
9. Substances A and B have specific heats c and 2c. A gets heat Q and B gets 4Q, and their temperatures rise by the same amount. If A's mass is m, find B's mass.
Answer: The mass of B is 2m.
10. A 3 kg substance gets 600 cal of heat and its temperature rises by 10 °C. Find its specific heat.
Answer: c = 0.02 cal/(g °C). (The book's printed answer is 0.0033 cal/(g °C), but working from the given data gives 0.02 cal/(g °C).)
11. Project: Find out about bimetallic strips and how a fire alarm uses one.
Answer: Sample: A bimetallic strip is two strips of different metals (e.g. brass and iron) joined along their length. Because they have different coefficients of expansion, on heating one lengthens more and the strip bends. In a fire alarm, heat from a fire bends the strip until it touches a contact, completing an electric circuit and ringing the bell. The same idea is used in thermostats of irons and heaters.
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. 1 calorie is equal to…
Answer: A. Remember 4.18.
2. The biggest source of heat for the Earth is…
Answer: C. Fusion in the Sun's core.
3. Temperature of a substance depends on its atoms'…
Answer: B. Heat depends on the total.
4. Two blocks of the same metal at the same temperature: block A has twice the mass of B. A has…
Answer: A. Twice as many atoms.
5. 68 °F equals…
Answer: B. (68 − 32)/9 × 5 = 20.
6. 0 °C is about…
Answer: C. K = C + 273.15.
7. Celsius and Fahrenheit give the same reading at…
Answer: D. Solve F = C.
8. A clinical thermometer reads from…
Answer: B. Body temperature range.
9. Which has the highest specific heat in the book's table?
Answer: B. 3.42 cal/(g °C).
10. Heat needed to raise 30 g of water by 10 °C is…
Answer: B. 30 × 10.
11. The inner vessel of a calorimeter is made of…
Answer: A. Good conductor, low specific heat.
12. In Δl = λ × l1 × ΔT, λ stands for…
Answer: C. Unit 1/°C.
13. Which metal in the book's table expands most per degree?
Answer: D. 23.1 × 10⁻⁶ /°C.
14. A gas heated in a closed bottle shows an increase in…
Answer: C. Volume cannot change.
15. A hot air balloon rises because heated air…
Answer: B. Density = mass/volume.
Get a ✓ Verified tutor for “Measurement and Effects of Heat” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Measurement and Effects of Heat the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 45 minutes
Get a ✓ Verified tutor for “Measurement and Effects of Heat” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Measurement and Effects of Heat.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Measurement and Effects of Heat” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.