TalentJR apps
Textbook: Chemistry – Class 12 (Balbharati, official free PDF) · pages 165–191
Steel bridges, copper wires, the purple of potassium permanganate, the orange of dichromate, catalysts in the Haber process, the red phosphors of old colour TVs and the uranium in nuclear reactors all come from the d- and f-blocks. This chapter covers the position and electronic configurations of transition (d-block) and inner transition (f-block) elements; trends in radii, ionisation enthalpy and oxidation states; magnetic behaviour (spin-only formula), colour, catalysis, interstitial compounds and alloys; preparation and reactions of KMnO₄ and K₂Cr₂O₇; extraction of iron in the blast furnace; and the lanthanoids and actinoids, including lanthanoid contraction. All exercise questions are answered below, with several book slips corrected.
d-block elements (groups 3–12) fill (n−1)d orbitals: general configuration (n−1)d¹⁻¹⁰ns⁰⁻². A transition element has an incompletely filled d subshell in the atom or in a common ion, so Zn, Cd and Hg are d-block but not typical transition elements. Cr (3d⁵4s¹) and Cu (3d¹⁰4s¹) are exceptions because half-filled and full d subshells are extra stable.
Across a series atomic radii decrease slowly then level off; 4d and 5d elements of a group have almost equal radii because of lanthanoid contraction. Ionisation enthalpies rise slowly. Variable oxidation states arise because ns and (n−1)d electrons have similar energies; Mn shows +2 to +7, and 4d/5d metals reach +8 (RuO₄, OsO₄).
Unpaired d electrons make ions paramagnetic: μ = √[n(n + 2)] B.M. Colour comes from d–d transitions in partly filled d subshells, so d⁰ and d¹⁰ ions (Sc³⁺, Ti⁴⁺, Zn²⁺, Cu⁺) are colourless. Transition metals are good catalysts, form interstitial compounds and alloys.
KMnO₄ is made from MnO₂ via green K₂MnO₄; K₂Cr₂O₇ from chromite via Na₂CrO₄ and Na₂Cr₂O₇. Both are strong oxidising agents in acid (MnO₄⁻ → Mn²⁺, Cr₂O₇²⁻ → Cr³⁺). Iron is extracted from haematite in a blast furnace using coke and limestone flux; cast iron, wrought iron and steel differ mainly in carbon content.
Lanthanoids (Ce–Lu, 4f) mostly show +3; +2 and +4 appear where f⁰, f⁷ or f¹⁴ results (Ce⁴⁺, Eu²⁺, Tb⁴⁺, Yb²⁺). Their radii shrink steadily (lanthanoid contraction). Actinoids (Th–Lr, 5f) are all radioactive and show a wider range of oxidation states (+3 to +7).
Get a ✓ Verified tutor for “Transition and Inner Transition Elements” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Write the configurations of Mn²⁺, Mn⁴⁺ and Fe³⁺ and the number of unpaired electrons in each.
Answer: Mn²⁺ 3d⁵ (5), Mn⁴⁺ 3d³ (3), Fe³⁺ 3d⁵ (5)
Calculate the spin-only magnetic moments of Cr³⁺ (Z = 24) and Cu²⁺ (Z = 29).
Answer: Cr³⁺ 3.87 B.M.; Cu²⁺ 1.73 B.M.
How many moles of Fe²⁺ are oxidised by 20.0 mL of 0.020 M KMnO₄ in acid?
Answer: 2.0 × 10⁻³ mol Fe²⁺
Why are Ce⁴⁺ salts good oxidising agents while Eu²⁺ salts are good reducing agents?
Answer: Both tend to reach the stable +3 state
| Topic | Reaction / formula | Note |
|---|---|---|
| Magnetic moment | μ = √[n(n + 2)] B.M. | n = unpaired electrons |
| Manganate formation | 3MnO₂ + 6KOH + KClO₃ → 3K₂MnO₄ + KCl + 3H₂O | green melt |
| Manganate → permanganate | 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O | disproportionation |
| Permanganate in acid | MnO₄⁻ + 8H⁺ + 5e⁻ → Mn²⁺ + 4H₂O | Mn +7 → +2 |
| Chromite roasting | 4FeO·Cr₂O₃ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂ | air, lime flux |
| Dichromate in acid | Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O | orange → green |
| Blast furnace reduction | Fe₂O₃ + 3CO → 2Fe + 3CO₂ | ≈ 900 K |
| Slag formation | CaO + SiO₂ → CaSiO₃ | limestone is the flux |
| Lanthanoid oxidation states | +3 common; Ce⁴⁺, Tb⁴⁺ (+4); Eu²⁺, Yb²⁺ (+2) | f⁰, f⁷, f¹⁴ stability |
Solve each one in your notebook first. Then open the solution and compare every step.
1. 1. Choose the correct option. (i) Diamagnetic: Cr²⁺ / Fe³⁺ / Cu²⁺ / Sc³⁺. (ii) Most stable O.S. of Ti. (iii) Components of nichrome. (iv) Most stable O.S. of ruthenium: +2 / +4 / +8 / +6. (v) Stable O.S. of Cr. (vi) Configuration of Cu and Cu⁺.
Answer: (i) d. Sc³⁺ (ii) c. +4 (iii) c. Ni, Cr (iv) c. +8 (see note) (v) d. +3, +6 (vi) c
2. 1. (vii) d⁰s⁰ configuration: Sc³⁺ / Ti⁴⁺ / V⁵⁺ / all. (viii) μ = 5.9 B.M.; unpaired electrons. (ix) Series in which all elements are radioactive. (x) Set with only paramagnetic ions. (xi) Actinoid other than U found in significant amount. (xii) Flux in extraction of iron from haematite.
Answer: (vii) d (viii) d. 5 (ix) b (x) d (xi) a (xii) b
3. 2. (i) O.S. of Mn in MnO₄²⁻ and MnO₄⁻. (ii) Uses of KMnO₄. (iii) Why salts of Sc³⁺, Ti⁴⁺, V⁵⁺ are colourless. (iv) Steps in manufacture of K₂Cr₂O₇ from chromite. (vii) Configurations of Cr and Cu. (x) Shielding of electrons. (xi) Z = 90: diamagnetic or paramagnetic?
Answer: (i) +6, +7 (xi) paramagnetic
4. 2. (v) Balance: (i) KMnO₄ + H₂C₂O₄ + H₂SO₄ → MnSO₄ + K₂SO₄ + H₂O + O₂; (ii) K₂Cr₂O₇ + KI + H₂SO₄ → K₂SO₄ + Cr₂(SO₄)₃ + 7H₂O + 3I₂.
Answer: (i) 2KMnO₄ + 5H₂C₂O₄ + 3H₂SO₄ → 2MnSO₄ + K₂SO₄ + 10CO₂ + 8H₂O (ii) coefficients 1, 6, 7 → 4, 1, 7, 3
5. 2. (vi) Stable oxidation states of plutonium, cerium, manganese, europium. (viii) Why nobelium is the only actinoid with +2. (ix) Why Ce(IV) solution is prepared in acidic medium.
Answer: Ce⁴⁺ + 4H₂O ⇌ Ce(OH)₄ + 4H⁺ is suppressed by acid
6. 3. (i) Trends in atomic radii of d-block elements. (iv) Fe²⁺ and Fe³⁺ configurations; which is more stable? (v) Similarities and differences of 3d, 4d, 5d series. (vi) Trends in ionisation enthalpies.
Answer: Fe³⁺ (3d⁵) is more stable than Fe²⁺ (3d⁶)
7. 3. (ii) Zones of the blast furnace with reactions. (iii) Cast iron vs wrought iron vs steel. (ix) Steps in a metallurgical process.
Answer: See zones and comparison
8. 3. (vii) Diamagnetic and paramagnetic metals with examples. (viii) Why Gd and Lr configurations differ from expected. (x) Ce and Tb as oxidising agents in +4. (xi) Eu and Yb as reducing agents in +2.
Answer: +4 lanthanoids oxidise, +2 lanthanoids reduce — both move to +3
Read the question, answer it in your head, then tap the card to check. 20 cards.
15 questions. Tap an option — you will see at once if it is right and why.
1. Which ion is diamagnetic?
Answer: A. Sc³⁺ is 3d⁰.
2. Spin-only moment of a d⁴ ion is…
Answer: B. √(4 × 6) = √24.
3. Which pair have nearly the same atomic radius?
Answer: D. Lanthanoid contraction.
4. Maximum number of oxidation states in the 3d series is shown by…
Answer: B. +2 to +7.
5. The colour of transition-metal ions is due to…
Answer: D. Partly filled split d orbitals.
6. In acidic medium, one MnO₄⁻ accepts…
Answer: C. +7 → +2.
7. In neutral medium, MnO₄⁻ is reduced to…
Answer: C. +7 → +4.
8. Acidified dichromate changes from orange to…
Answer: A. Cr³⁺ is green.
9. Chromite ore is…
Answer: A. Iron chromite.
10. Slag formed in the blast furnace is mainly…
Answer: D. CaO + SiO₂.
11. Purest commercial form of iron is…
Answer: C. < 0.2 % C.
12. Common oxidation state of lanthanoids is…
Answer: D. Lose 6s² and one 4f/5d electron.
13. Which lanthanoid ion is a good oxidising agent?
Answer: B. Ce⁴⁺ → Ce³⁺.
14. All actinoids are…
Answer: A. Unstable nuclei.
15. Which set has only paramagnetic ions?
Answer: C. 4f¹, 4f⁶, 4f¹³ all have unpaired electrons.
Get a ✓ Verified tutor for “Transition and Inner Transition Elements” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Done with the notes? Revise Transition and Inner Transition Elements the fun way: match key terms, beat the 60-second lightning round and spot true or false facts. Every game uses only this lesson, so each round is real exam revision.
⭐ 0 XP⏱ About 85 minutes
Get a ✓ Verified tutor for “Transition and Inner Transition Elements” — live online or at home. We aim to suggest up to 3 tutors within 24 hours.
Sign in free to see the answers to the textbook exercise of Transition and Inner Transition Elements.
Sign in to see solutionsStuck on a question? Type it, 🎤 speak it or 📷 snap a photo of it and get simple, step-by-step help with “Transition and Inner Transition Elements” — important questions, a quick quiz, revision notes — in English, मराठी or हिंदी.
Sign in with Google to ask the AI tutor. It's free — 20 questions a day, one TalentJR account.
Sign in to askPrefer a real teacher? TalentJR teachers take live online classes anywhere in India. Tell us what you need and our team will call you with timings and fees.